VI-2TK-MX-F3

Current - Output (Max):	1.88A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	40V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are devices used to convert direct current (DC) power from one voltage level to another. Their primary purpose is to convert DC voltages to higher or lower levels in order to meet the requirements of electrical loads. They are commonly used in applications such as mobile phones, computers, televisions, lighting systems, and automobiles.The VI-2TK-MX-F3 is a high efficiency DC-DC converter designed for use in applications requiring a wide input voltage range, low output ripple, and high transient response. This converter is suitable for a range of applications such as computers, lifestyle electronics, and communications equipment.The working principle of the VI-2TK-MX-F3 DC-DC converter is based on a switching regulator. A switching regulator is a circuit that controls the output voltage and current by rapidly toggling a switch between two extremes. When the switch is open, power is drawn from the input and stored in an inductor. When the switch is closed, the energy stored in the inductor is released, creating a constant output voltage.When the VI-2TK-MX-F3 is used in an application, it is connected to the input power source and the electrical load. It draws current from the power source and regulates it to produce a voltage output suitable for the load. The working principle of the device is based on the concept of flyback operation. In a flyback regulator, the inductor is the primary energy storage component. When the switch is closed, the input energy is stored in the inductor. When the switch is opened, the stored energy is then released through the output capacitor, creating a constant voltage across the load.The input voltage range of the VI-2TK-MX-F3 converter is from 7V to 16V, making it suitable for a variety of power sources. It has a maximum output power of 81.5W, a peak efficiency of up to 88%, and a minimum load current of 0.1A. The device has an adjustable soft start, which ensures that the converter starts up correctly and does not overload the system.The VI-2TK-MX-F3 also has a wide range of protection features, including overcurrent protection, overvoltage protection, and short circuit protection. This ensures that the device will not be damaged or cause damage to a system in the event of an overload or under-voltage condition.The VI-2TK-MX-F3 DC-DC converter is an efficient and reliable device that can be used for a wide variety of applications. Its wide input voltage range, low output ripple, and high transient response make it suitable for applications such as computers, lifestyle electronics, and communications equipment. Its protective features also ensure that it will not be damaged or cause damage to a system in the event of an overload or under-voltage condition.

The specific data is subject to PDF, and the above content is for reference