| Allicdata Part #: | VI-2TL-MW-F2-ND |
| Manufacturer Part#: |
VI-2TL-MW-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 28V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 28V 3.... |
| DataSheet: |  VI-2TL-MW-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 3.57A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 28V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are widely used in different applications. VI-2TL-MW-F2 is one of these converters which are used in a range of DC applications. This type of converter can be used for various purposes including voltage conversion of DC voltage, DC smoothing and DC motor drive control.
The VI-2TL-MW-F2 converter is a two-stage DC to DC converter. It consists of two converter stages, the first converter stage being a DC voltage conversion stage, while the second converter stage is a DC motor drive control stage.
The first converter stage is an isolated, low-power buck converter with high efficiency, which can be used to convert a low voltage DC signal into a higher voltage DC signal. This converter can also be used to convert a low voltage DC signal into a low voltage AC signal. The second converter stage is a low-side drive which is used to control a DC motor. The low-side drive uses a PWM signal to control the DC motor speed and direction.
The working principle of the VI-2TL-MW-F2 converter is relatively simple. The converter first accepts an input DC voltage and converts it into a higher voltage DC signal. Then, the signal is sent to the low-side driver, which controls the speed and direction of a DC motor. The converter also has the ability to convert a low voltage DC signal into a low voltage AC signal.
The VI-2TL-MW-F2 converter is used in a wide range of applications such as electric vehicle control, motor control, and power conditioning. In electric vehicle control, the converter can be used to convert an AC signal to a DC signal, which is then used to control the motor. In motor control, the converter can be used to convert a DC signal into a higher voltage DC signal, which is then used to control the motor. In power conditioning, the converter can be used to reduce noise and voltage fluctuation.
In conclusion, the VI-2TL-MW-F2 DC to DC converter can be used for a variety of applications, including voltage conversion, DC smoothing and DC motor drive control. The converter is simple to use and offers high efficiency and low power consumption.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...