| Allicdata Part #: | VI-2TN-MV-F2-ND |
| Manufacturer Part#: |
VI-2TN-MV-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 18.5V 150W |
| More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
| DataSheet: |  VI-2TN-MV-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 8.11A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 150W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 18.5V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are state-of-the-art power conversion technologies that are widely used in applications like satellite communications, motor drives, electric vehicles, and home automation. The VI-2TN-MV-F2 DC-DC converter is a converter specifically designed for mobile and industrial applications.
The VI-2TN-MV-F2 DC-DC converter has a wide input voltage range of 4.5V to 48V and can provide a single output voltage in the range of 0.7V to 32V. The converter is designed to be highly efficient, with a typical efficiency of 95%, allowing for higher power densities. It has a maximum output current of 12A, and can operate at temperatures from -40 to +125 °C.
The converter has a wide range of features that make it suitable for use in a variety of applications. It is designed to be highly flexible and can be adapted to different operating conditions. It has adjustable soft start, adjustable current limiting, short circuit protection, overload protection, and remote voltage sensing. It also features an array of operating modes, including voltage and current mode, hysteretic mode, and skip cycle mode.
The working principles of the VI-2TN-MV-F2 are relatively straightforward. The converter operates as a power electronic switch, with a high-side and a low-side driver both used to control the power component on the two sides of the converter. When the input voltage is greater than the desired output voltage, the low-side switch is turned on, and the output voltage is maintained at the desired level. When the input voltage is below the desired output voltage, the high-side switch is turned on and the output voltage is boosted back up to the desired level. The converter uses a feedback loop to monitor the output voltage and adjust the on/off timing of the switches to achieve a steady output voltage.
The VI-2TN-MV-F2 DC-DC converter is a versatile device that is ideal for applications where multiple output voltages and high efficiency are required. It has a wide operating temperature range, adjustable soft start, adjustable current limiting, overload and short circuit protection, and multiple operating modes. Its straightforward working principles make it easy to use and deploy in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...