VI-2TT-IY-F3

Current - Output (Max):	7.69A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	6.5V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC converters are circuits that are used to convert the voltage and current levels produced by a direct current (DC) power sources to those required by a particular application. This is frequently done to increase the available power or to reduce the ripple voltage. A typical device of this type is the VI-2TT-IY-F3 DC DC converter. The VI-2TT-IY-F3 DC DC converter is made up of three components – the Rectifier, the Switching Regulator and the Inverter. The operation of the converter is based on the principles of electric energy conversion between electrical power and electric fields. The Rectifier converts AC voltage from power line sources into DC voltage. The rectifier is composed of a number of diodes, which act like electrical one-way-valves. When the voltage across the diodes is below the level of the AC power source, the diodes allow current to flow in one direction, storing the electrical energy. This energy is then stored in an electrolytic capacitor and released when needed by conduction through the diode.The Switching Regulator changes the output voltage of the Rectifier to the desired voltage. The voltage of the output is determined by an internal switching regulator IC, such as an LM317 or LP2951, which pulses the output voltage on and off in a controlled fashion. The regulator IC senses the voltage at the output and adjusts the on and off times of the pulse to keep the output voltage within a set range. The Inverter is a device that changes the direction of the voltage, usually from DC to AC. It is typically used in applications where AC power is required, such as in lighting systems or motor drives. The VI-2TT-IY-F3 DC DC converter is designed for use in a wide range of applications, including motor drives, pumps, elevators, HVAC systems, UPS systems, portable power tools, industrial machines, and security systems. The converter is designed to operate efficiently and reliably in most environmental conditions and temperature ranges.The VI-2TT-IY-F3 DC DC converter is a reliable and versatile device that is easy to install and use. It is energy efficient, can handle a wide range of input voltages, and is capable of supplying a wide range of output power. It is also safe to use, as it conforms to low voltage and overcurrent protection requirements.The VI-2TT-IY-F3 DC DC converter is a reliable and versatile power solution for a variety of applications. Its combination of efficient operation, wide range of input and output voltages, and ease of use make it an ideal choice for many types of power systems.

The specific data is subject to PDF, and the above content is for reference