Allicdata Part #: | VI-2WH-IV-F3-ND |
Manufacturer Part#: |
VI-2WH-IV-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 52V 150W |
More Detail: | Isolated Module DC DC Converter 1 Output 52V 2.... |
DataSheet: | VI-2WH-IV-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 18V |
Voltage - Input (Max): | 36V |
Voltage - Output 1: | 52V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 2.88A |
Power (Watts): | 150W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -40°C ~ 85°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are becoming increasingly important as technology continues to advance. As these types of converters are useful in a wide range of applications, they are found in many industries. In this article, we will explore the VI-2WH-IV-F3 application field and the working principle.
VI-2WH-IV-F3 is a DC-DC converter designed for applications in a wide range of industries. The converter is particularly suitable for applications requiring small and lightweight packages with high-efficiency power conversion. It is capable of providing up to 1.25W output with a 5-30V input and 2.0-12V output. This converter is highly efficient, with a maximum conversion efficiency of up to 95%. Its low profile design allows for easy installation and operation. In addition, its on-board EMI filter allows for easy compliance with EMI/EMC regulations.
The VI-2WH-IV-F3 is a switching DC-DC converter. It uses a switching regulator to convert the input voltage into a regulated DC output voltage. The device is controlled by a PWM (pulse width modulation) control loop. The input voltage is sensed by an error amplifier, which compares the input voltage to a reference voltage. If the input voltage is higher than the reference voltage, the error amplifier will signal the control circuit to reduce the width of the PWM pulses, thus reducing the output current. If the input voltage is lower than the reference voltage, the error amplifier will signal the control circuit to increase the width of the PWM pulses, thus increasing the output current.
The VI-2WH-IV-F3 also includes some additional features such as overload protection, over-temperature protection, and output voltage monitoring. The overload protection ensures that the output current does not exceed the maximum rated current. The over-temperature protection will shut down the converter if the operating temperature is too high. The output voltage monitoring feature will provide a warning if the output voltage is too high or too low.
The VI-2WH-IV-F3 is an ideal DC-DC converter for a wide range of applications. It is highly efficient, has a low profile design, offers overload protection, over-temperature protection, and output voltage monitoring. This makes it a great choice for applications requiring higher efficiency and compact size. The device is widely used in automotive, industrial, medical, and consumer electronics applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...