
Allicdata Part #: | VI-2WM-CV-F3-ND |
Manufacturer Part#: |
VI-2WM-CV-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 150W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 15... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 15A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 150W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 36V |
Voltage - Input (Min): | 18V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A DC-DC converter is a device that transfers direct current (DC) from one voltage level to another. It is used in a wide range of applications, from providing power to remote, low-voltage devices such as laptop computers and cellular phones to converting high voltages for use in telecommunications and industrial processes. The VI-2WM-CV-F3 is a type of DC-DC converter, more specifically a step-up DC-DC converter that converts a lower input voltage into a higher output voltage. The VI-2WM-CV-F3 is well suited for use in portable and/or battery-powered applications.
The VI-2WM-CV-F3 uses a buck-boost topology circuit and is capable of providing continuous output power of up to 2 watts to devices operating from input voltages ranging from 0.6 V up to 4.2 V. The output voltage can be varied within the range of 1.0 V to 12.6 V through the use of a single external resistor that is connected to one of the input pins. The converter is capable of regulating output voltage with an error of ±6 mV.
The working principle of the VI-2WM-CV-F3 is based on the induction principle. The input voltage is converted into a current using a buck-boost inductor. This current is then passed through an output filter which smoothes out the voltage ripple. Finally, the voltage is regulated using an error-amplifier circuit which adjusts the output voltage to match the desired value.
The VI-2WM-CV-F3 can be used in a variety of applications including battery-powered and small size DC-DC converters, and portable chargers and power supplies. It is designed to be used in low voltage, low power applications and is suitable for use in hand-held electronics, such as cellular phones, portable media players, digital cameras, and personal digital assistants (PDAs). The VI-2WM-CV-F3 can also be used in many automotive, telecommunications, and industrial applications.
The VI-2WM-CV-F3 can be easily configured to match the requirements of an application. It is a highly efficient and reliable device that is capable of providing accurate output voltages even in harsh environmental conditions. The device is also capable of meeting both cost and performance requirements of any application.
In summary, the VI-2WM-CV-F3 is a DC-DC converter with a buck-boost topology. It is designed for use in low power, low voltage applications and is ideal for use in portable and/or battery-powered applications. The device is capable of providing continuous output power of up to 2 watts with an error of ±6 mV. The VI-2WM-CV-F3 is well suited for use in a wide variety of applications and is highly efficient and reliable. It can be configured to meet the requirements of any application, providing both performance and cost advantages.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 1.8V 120WIsolated Module...

DC DC CONVERTER 1.8V 120WIsolated Module...

DC DC CONVERTER 1.8V 120WIsolated Module...
