VI-2WW-EW-F2

Current - Output (Max):	18.18A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are electronic devices used to convert power from a direct current (DC) source to another DC source, with different voltage and current values. The VI-2WW-EW-F2 is a specific type of DC-DC converter, and its applications and working principles are described below.

Applications

The VI-2WW-EW-F2 has a wide range of applications and can be used in various industries. One of its main applications is the conversion of energy from solar cells directly into usable electrical power. By using the VI-2WW-EW-F2 converter, solar cells can be connected to any standard DC power grid, providing sustainable power.Another application of the VI-2WW-EW-F2 is in battery charging systems. It converts varying dc power inputs from solar cells, battery packs, and wind turbines into a single, stable dc power output, suitable for charging battery packs. The converter is also capable of operating at low voltages, allowing for the operation of critical systems in low-power conditions.The VI-2WW-EW-F2 converter is also used to provide isolated dc power outputs from non-isolated sources, such as AC wall outlets. This is done by using the converter to provide an isolated output which can in turn be used to power specific appliances.Lastly, the VI-2WW-EW-F2 converter is used in a variety of commercial and industrial applications. It is often used to power medical devices, industrial equipment, military applications, and even vehicle electric systems.

Working Principle

The VI-2WW-EW-F2 is a non-isolated buck-boost dc-dc converter. It works by converting an existing dc input voltage to an output voltage that is either higher or lower than the input voltage, depending on the load requirements.The converter consists of a series of electronic switches that alternately turn on and off in a specific sequence. This allows the output voltage to be regulated to the load requirements.The VI-2WW-EW-F2 is capable of producing high power with a wide range of input voltage from 5-48V, and an output voltage of 5-36V. The maximum output current is 8A, making it suitable for a wide variety of applications. In summary, the VI-2WW-EW-F2 is a non-isolated buck-boost dc-dc converter, with a wide range of applications. Its electronic switches regulate the output voltage, and it is capable of producing high power with a wide range of input voltage.

The specific data is subject to PDF, and the above content is for reference