VI-B12-MW-F4

Current - Output (Max):	6.67A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	15V
Voltage - Input (Max):	32V
Voltage - Input (Min):	21V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC converters are an important type of electronic device used to convert direct current between different voltage levels or between different current levels. They have a wide range of applications and are widely used in a variety of consumer electronics, industrial, automotive and commercial applications.There are several different types of DC DC converter available, each with different characteristics and capabilities to suit different applications. One of the most commonly used and popular of these is the VI-B12-MW-F4 DC DC converter.The VI-B12-MW-F4 is a compact, low-cost, easy-to-use device which is well suited to a variety of applications. It is capable of converting voltage levels from 12V to 400V and providing power conversion for up to 10 Watts. It can also provide short-circuit protection and thermal protection against heat accumulation or overload.The VI-B12-MW-F4 has a maximum primary or input voltage rating of 12V and a maximum secondary or output voltage rating of 400V. The output current can be varied by adjusting the duty cycle of the PWM signal input which is used to control the switching of the power transistors. The output voltage is controlled by an enable pin which can be used to enable or disable the power transistors.The working principle of the VI-B12-MW-F4 is relatively simple and straightforward. The device consists of a PWM signal generator, a power transistor, a feedback circuit, and a transformer. The PWM signal generator produces an alternating voltage waveform with the desired duty cycle. This voltage is then used to control the switching of the power transistor, which in turn switches the current in the transformer. The transformer then steps up or steps down the input voltage to the desired output voltage.The feedback circuit is used to maintain a fixed output voltage and also to protect the device from any overvoltage conditions. The feedback circuit will detect any overvoltage or undervoltage conditions and will then either reduce the duty cycle of the PWM signal to reduce the output voltage or increase the duty cycle of the PWM signal to increase the output voltage, restoring it to the desired level.The VI-B12-MW-F4 DC DC converter is an extremely useful device which can be used for a range of applications. It is small, lightweight, economical and easy to use, making it an ideal choice for applications such as security systems, power supplies, automotive electronics, and industrial automation.

The specific data is subject to PDF, and the above content is for reference