VI-B1K-MY-F1

Current - Output (Max):	1.25A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	40V
Voltage - Input (Max):	32V
Voltage - Input (Min):	21V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VI-B1K-MY-F1 DC DC ConvertersA DC DC converter is a device used to convert the output voltage of an electrical system in one domain to a different voltage level in a different domain. It is used in a variety of applications which include providing electrical power from a battery to a device, regulating the voltage of a battery operated system, or providing a reliable voltage signal to a remote system from a more distant power source.DC-DC converters are generally divided into two types: linear and switching. To better understand the distinction between linear and switching DC-DC converters, it is first useful to discuss the ideal characteristics of each type.For a linear converter, the output voltage is simply the input voltage multiplied by some scaling factor (generally referred to as the gain or attenuation). The output voltage is determined by the input voltage and the scaling factor, thus the converter does not generate any additional power. This type of converter is very simple and relatively inexpensive to produce. However, it is not very efficient as the voltage conversion is limited to a factor of two or three.Switching DC-DC converters, in contrast, use a switching transistor to rapidly turn the output voltage on and off and to regulate the input voltage level. This means that instead of having a fixed scaling factor, a switching converter allows for the output voltage to be controlled between some minimum and maximum level. This enables the output voltage to be manipulated to match the input voltage, thereby allowing for much higher efficiencies than linear converters. Switching DC-DC converters are also more complex and expensive to produce than their linear counterpart, though they are able to achieve high efficiency when operated over a wide range of input voltage levels. In addition, they generate less heat and can accommodate higher current draws than their linear counterparts.The VI-B1K-MY-F1 is an example of a switching DC-DC converter. It is a compact, low-cost, high performance DC-DC converter capable of delivering up to 30W of output power from an input voltage range of 7.0V – 30V. This converter is ideally suited for applications requiring a reliable, high-efficiency DC-DC conversion, including industrial, medical, and automotive applications. The VI-B1K-MY-F1 features an advanced active-clamp reset control technique which eliminates the need for an additional control loop and guarantees both line and load regulation. It also features a Power Good signal that monitors and reports the output voltage level, an over-voltage protection circuit that prevents the output voltage from exceeding the rated maximum, and a thermal shutdown circuit that ensures protection from heat damage.The VI-B1K-MY-F1 can be used for a variety of applications, including providing power from a battery to a device, regulating voltage levels in battery powered systems, or providing a reliable voltage signal to a remote system from a more distant power source.In summary, the VI-B1K-MY-F1 switching DC-DC converter is a low cost, high performance, and highly efficient device, enabling a wide range of applications where reliable voltage regulation is required. As such, it is an ideal choice for a variety of modern electronic devices.

The specific data is subject to PDF, and the above content is for reference