| Allicdata Part #: | VI-B1N-EW-F2-ND |
| Manufacturer Part#: |
VI-B1N-EW-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 18.5V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
| DataSheet: |  VI-B1N-EW-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 5.41A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 18.5V |
| Voltage - Input (Max): | 32V |
| Voltage - Input (Min): | 21V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters play an important role in many applications where a direct voltage conversion is required. VI-B1N-EW-F2 is one such versatile, reliable, and efficient device for DC voltage conversion. In this article, we will discuss the application field and working principle of the VI-B1N-EW-F2.
The VI-B1N-EW-F2 is a DC-DC converter that is capable of performing voltage conversions from 4.5 to about 17V. This range makes it well-suitable for a wide variety of applications. For instance, it is commonly used in the automotive industry to convert higher supply voltages into lower voltages for a variety of sensors and actuators.
The VI-B1N-EW-F2 is also used in the industrial sector, where it is used to take power from a higher microprocessor voltage to the proper voltage level to meet power requirements of industrial robots. Similarly, it is used in commercial and residential settings to transform from one voltage level to another for powering lights, fans, and other small devices.
The device is highly efficient with up to 96% efficiency at most conditions. This makes it a great choice for applications where energy efficiency is of utmost importance. Additionally, the VI-B1N-EW-F2 has a wide input range and is able to withstand high transient voltages and has excellent filtering to eliminate noise and ripple.
The conversion takes place in two steps. In the first step, a P-channel MOSFET is used as a switch. This is used to connect the input voltage source to the output. When the switch is on, input current flows to the output and the circuit gets charged up to the output voltage level. When the switch is off, the output voltage is maintained by the capacitor.
In the second step, a regulator is used to further regulate the output voltage and current. This regulator is usually a linear regulator and is used to limit the output current and voltage to the desired levels. The linear regulator also helps to reduce ripple and other noise from the output waveform.
Overall, the VI-B1N-EW-F2 is a versatile and efficient DC-DC converter that can be used in a variety of applications. Its wide input range and high efficiency make it a great choice for applications where energy efficiency is of paramount importance.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...