VI-B1T-MX-F4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are widely used in many applications, and the VI-B1T-MX-F4 is a typical example. This device is designed to convert input voltage, either from a battery or direct current source, to lower output voltage, and is typically used in industrial applications such as motor control, robotics, lighting, and other similar applications.

The VI-B1T-MX-F4 is a compact, efficient DC-DC converter that is designed to accept an input voltage of 4.5V to 24V and provides a regulated output of 3.3V or 5V. The maximum output voltage is limited to 10V, and the output current at 16.7A 20A peak. This makes the VI-B1T-MX-F4 suitable for applications that require high current power supplies, such as motor controllers, robotics, and LED lighting.

In most cases, the VI-B1T-MX-F4 is used with a switching power supply, which is the most cost-effective way to deliver regulated DC voltage. In this type of circuit, the input is switched on and off at high frequencies, and the DC output voltage is regulated using a feedback loop. This type of power supply is more efficient than linear regulators, as less power is dissipated in the form of heat, leading to better energy efficiency.

The VI-B1T-MX-F4 can be configured to operate in a wide variety of ways, depending on the application. The most common configurations include buck, boost, or buck-boost, which are used for step-down or step-up DC conversion. The operating parameters such as switching frequency and voltage range can also be programmed, allowing for highly customized solutions.

In addition to the buck and boost configurations, the VI-B1T-MX-F4 can also be used as an isolated DC-DC converter. This type of converter is used to prevent noise and electrical interference between two circuits, and is typically used in applications where high power or voltage isolation is required. The VI-B1T-MX-F4 has an internal isolation of 500VDC, which provides sufficient isolation for most applications.

The VI-B1T-MX-F4 is also equipped with a wide range of safety features, including overload protection, thermal shut down, and an anti-lockout feature. This ensures that the converter is safe to use in a wide variety of applications, and that it will not cause any damage to the connected circuitry or system.

Overall, the VI-B1T-MX-F4 is a highly versatile and reliable DC-DC converter that can be used in a wide range of applications. Its excellent performance, wide operating range, and range of safety features make it an ideal solution for many power conversion applications.

The specific data is subject to PDF, and the above content is for reference