VI-B2K-CY-F2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are an essential component in any electrical system, enabling power to be transmitted between circuits that have different voltage levels or even different electrical systems. A DC-DC converter can provide a regulated DC voltage to a load, even when the input voltage varies, allowing for efficient conversion from one level to another. DC-DC converters have a wide range of applications, from small consumer electronics to large-scale industrial equipment, and from solar and wind energy systems to electric vehicle charging.

VI-B2K-CY-F2 Application Field and Working Principle

The VI-B2K-CY-F2 DC-DC converter is designed to offer a regulated output voltage and can be used as the primary source of power in a wide range of applications. It has a maximum output voltage of 15V, a minimum input voltage of 4V, and an efficiency range of 88-93%. The converter is capable of providing up to 20W of power at full load and supports a wide range of input and output voltages.

The converter consists of a PWM (Pulse Width Modulated) output stage, a rectifier stage that uses MOSFETs (Metal-Oxide-Semiconductor Field Effect Transistors) to convert the AC voltage to DC, and finally, a voltage-regulator stage that converts the DC signal to the desired output voltage. The PWM output stage is used to adjust the duty cycle of the output waveform to match the input voltage, so that the output voltage is not affected by variations in the input voltage. The rectifier stage consists of a bridge rectifier, which is a bridge connected with four diodes, which converts the AC voltage to DC by blocking alternate half cycles of the AC signal. The voltage-regulator stage then adjusts the DC voltage to the desired output voltage by using a voltage regulator, such as a linear, switching, or pulse-control voltage regulator.

The VI-B2K-CY-F2 is a highly efficient DC-DC converter, providing high power conversion with low noise and low power dissipation. The converter has been designed for use in a variety of applications, including power supplies for communications equipment, medical devices, industrial control systems, and renewable energy systems. It is also suitable for use in automotive applications, including battery charging and other automotive power supplies.

The converter has several features that make it a cost-effective solution for many applications. These features include a wide input and output voltage range (4V to 15V), high efficiency (up to 93%), and low output ripple (<1%). The converter also includes overload protection, short-circuit protection, and thermal protection, making it a safe and reliable power supply.

The VI-B2K-CY-F2 is a reliable and cost-effective DC-DC converter, suitable for a wide range of applications. It offers high efficiency, low noise, and low power dissipation, and is protected against overload, short-circuit, and thermal events. With a wide input voltage range and a high ripple tolerance, it is a great choice for many applications that require a regulated DC output voltage.

The specific data is subject to PDF, and the above content is for reference