Allicdata Part #: | VI-B2K-MW-ND |
Manufacturer Part#: |
VI-B2K-MW |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 40V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 40V 2.... |
DataSheet: | VI-B2K-MW Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Specifications
Current - Output (Max): | 2.5A |
Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 40V |
Voltage - Input (Max): | 56V |
Voltage - Input (Min): | 21V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VI-B2K-MW application field and working principle is a type of DC DC converter power supply technology. It is primarily used for providing power to electronic devices and systems such as those associated with medical, robotic, wireless, and industrial applications. The VI-B2K-MW type of converter is based on a switching power supply technique, which is more energy-efficient and cost-effective than linear-based power supplies. This type of converter is also simpler and more compact than other power supplies, which makes it popular among designers.The VI-B2K-MW converter uses a rectifier to convert the alternating current from a commercial outlet to direct current. The input switch is used to convert the direct current from the rectifier into a square wave, which helps to reduce the amount of power lost during the conversion process. The converter then uses an inverter stage to convert the square wave back into direct current. In order to regulate the output voltage, the converter uses a feedback loop to measure the output voltage, which is then be used to adjust the frequency of the switching signal. This is done by controlling the width or length of the switching pulses. The VI-B2K-MW converter has a wide output voltage range and is compatible with a large number of load types, including resistive, capacitive, and inductive loads. It also has a high level of efficiency, with minimal power loss during the conversion process. Additionally, the converter has a low noise level and a low ripple output voltage. The VI-B2K-MW type of DC DC converter is a valuable solution for applications where space constraints, cost, and efficiency are important considerations. It is also well-suited for applications that require a wide output voltage range and compatibility with a variety of load types.
The specific data is subject to PDF, and the above content is for reference
Latest Products
AEQ20B48N-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEO40Y48N-6L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-6L
DC DC CONVERTER 1.8V 120WIsolated Module...