VI-B3K-IX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters allow a low voltage direct current (DC) signal to control a high voltage DC output. The VI-B3K-IX is a module designed for this purpose, comprising of a DC control circuit and a power switching circuit. This article will discuss the application field and working principle of the VI-B3K-IX.

Application Field

The VI-B3K-IX is a Power-Factor-Corrected (PFC) half-bridge convertible DC to DC converter that can be used in a variety of applications. It features a highly precise feedback algorithm enabling a high-performance dynamic response to load changes. The rated output power of the VI-B3K-IX is 3000 watts and its input voltage range is 100-300 VDC. Some applications that can benefit from the use of the VI-B3K-IX include industrial automation, telecom systems, power backup systems, uninterruptable power supplies, and auxiliary power systems.

Working Principle

The VI-B3K-IX uses a power switch, usually an insulated gate bipolar transistor (IGBT) or a MOSFET, to control its output. An energy control circuit is used to drive the power switch. The control circuit compares the output voltage (measured by the voltage divider) to a reference voltage to determine when the power switch should be turned on/off. During each “on” cycle, the control circuit supplies current to the power switch to initiate conduction. The power switch then conducts current from the input to the output, which accelerates the output voltage until it reaches the regulated level.

In the event of a load change, the control circuit responds quickly by turning the switch on/off as per the load current demand, maintaining the output voltage within a predetermined range. This allows for near continuous regulation of the output without the need for external components such as energy dump capacitors. The VI-B3K-IX also features integrated protection mechanisms to prevent damage to the circuit from over-currents and over-voltages.

Conclusion

The VI-B3K-IX is a DC to DC converter module that can be used in a variety of applications. Its high performance control algorithm enables a rapid response to load changes. The rated output power of the VI-B3K-IX is 3000 watts and the input voltage range is 100-300 VDC. The VI-B3K-IX also features integrated protection mechanisms and does not require external components such as energy dump capacitors.

The specific data is subject to PDF, and the above content is for reference