| Allicdata Part #: | VI-B5F-MW-F3-ND |
| Manufacturer Part#: |
VI-B5F-MW-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 72V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 72V 1.... |
| DataSheet: |  VI-B5F-MW-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.39A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 72V |
| Voltage - Input (Max): | 200V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used for power conversion from one type of DC power to another, making them an important part of any electronic system. The VI-B5F-MW-F3 is an example of one such converter, and is a great choice for applications that require high efficiency, small size, and various output voltage configurations. This article will discuss the application field and working principle of the VI-B5F-MW-F3 converter.
The VI-B5F-MW-F3 is a high power voltage buck-boost converter and is capable of converting a wide input voltage range (9-75V) into a regulated output voltage (with negligible ripple). It has a maximum output current of 5A and a maximum efficiency of up to 94%. The converter is especially suitable for applications that require low voltage and high current such as medical equipment, automotive electronics, and industrial automation.
The VI-B5F-MW-F3 is also a great choice for applications where the output voltage needs to remain stable in the event of a sudden load change. It can maintain the preset output voltage by automatically adjusting the output at different load levels, making it ideal for solar powered devices, motor control systems, and LED lighting systems.
The converter uses Pulse Width Modulation (PWM) to regulate the output voltage, which is done by changing the width of a pulsed signal.By switching the pulse width, the voltage at the output can be altered to the required level.When no load is connected, the PWM signal continuously adjusts to keep the output voltage stable, and when a load is connected, it adjusts the output voltage to meet the needs of the load.
The VI-B5F-MW-F3 also has advanced protection features such as over-voltage protection, short-circuit protection, and overload protection. This provides additional assurance that the output voltage does not exceed the set voltage and that the device does not get damaged due to an overload.
Overall, the VI-B5F-MW-F3 is ideal for applications that require high efficiency, small size, and various output voltage configurations. It also features advanced protection features and automatic voltage stabilization, making it a great choice for a wide range of DC-DC conversion applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...