Allicdata Part #: | VI-B5M-EX-F4-ND |
Manufacturer Part#: |
VI-B5M-EX-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 7.... |
DataSheet: | VI-B5M-EX-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 7.5A |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC, or direct current to direct current, converters are devices that convert a direct current voltage from one value to another. The VI-B5M-EX-F4 is a DC-DC converter that can be used in a variety of applications and has a simple working principle.
The VI-B5M-EX-F4 can be used in a variety of applications, such as in industrial power supplies, automotive and transportation applications, medical devices, alternative energy systems, and test instrumentation. It is designed to convert a direct current voltage of 48V to 24V with an output current range from 0 to 4.2A. The device has a wide input voltage range of 36-72V and a wide temperature range of -40°C to 105°C.
The VI-B5M-EX-F4 is designed with high efficiency and reliability. It has an efficiency of up to 95%, a low quiescent current, and a low ripple noise figure of 20mV. The device is also able to operate in a wide temperature range without compromising performance. It has a high MTBF (mean time between failures) of over 200,000 hours, and it is rated for over 75,000 hours at full load.
The device features a low profile case with thermal protection, as well as output voltage and current limiting. It is also fully isolated from the input, which helps protect sensitive components from electrical noise. The device is also designed with safety features, such as over-voltage protection, over-current protection, and short-circuit protection.
The VI-B5M-EX-F4 works on a simple, but reliable principle. It uses a switch-mode power supply (SMPS) to convert the DC input voltage to a different regulated DC output, with the help of an inductor and a capacitor. The SMPS regulates the output by switching the power on and off according to the input and the desired output voltage. This relatively simple switching process requires very little energy and can be very efficient.
The VI-B5M-EX-F4 is a reliable and efficient direct current to direct current converter. It can be used in a variety of applications, has a wide voltage input range, offers protection from electrical noise, and works on a simple switching principle. With its high efficiency and low quiescent current, this converter can be a great choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...