Allicdata Part #: | VI-B5M-IV-F4-ND |
Manufacturer Part#: |
VI-B5M-IV-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 10V 150W |
More Detail: | Isolated Module DC DC Converter 1 Output 10V 15... |
DataSheet: | VI-B5M-IV-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 15A |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 150W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 10V |
Voltage - Input (Max): | 200V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are versatile and cost-effective devices that convert electrical power from a direct current (DC) source to a higher or lower DC output voltage. The VI-B5M-IV-F4 DC-DC converter is a highly efficient, low-noise, low-power DC-DC converter that can convert a variable DC input voltage into an output DC voltage of 40 V to 60 V. It is designed to operate in low-noise conditions and provide maximum conversion efficiency and power output.
The fundamental principle of DC-DC conversion is the transfer of energy from one DC voltage to another. The VI-B5M-IV-F4 uses a switching-mode power conversion technique to convert a low-voltage DC input into a regulated DC output. The converter consists of an input section, a control section, a switching section, and an output section.
The input section consists of a full-wave bridge rectifier, an inductor, and a filter capacitor. The bridge rectifier smooths the input voltage and the filter capacitor provides a DC output. The control section contains an error amplifier, a reference and a pulse-forming network. The error amplifier combines the output of the rectifier and filter to compare it to the desired output voltage, and the reference IC provides a steady voltage reference for the error amplifier. The pulse-forming network uses pulse width modulation (PWM) to create a series of pulses to the switching section.
The switching section consists of a high-performance MOSFET, a current-limiting device, and a transformer. The MOSFET switches the current through the inductor, and the current-limiting device ensures consistent, safe operation. The transformer steps down the incoming voltage and transmits the power to the output.
The output section consists of a rectifier, a filter capacitor, a reference, and an optional over-voltage clamp. The rectifier converts the AC voltage generated by the transformer into a DC output, and the filter capacitor and reference help to stabilize the voltage output. The optional overvoltage clamp increases the voltage output to the final desired output voltage.
The VI-B5M-IV-F4 DC-DC converter can be used in a variety of applications, including power supplies, automotive systems, communications equipment, and lighting systems. It provides high efficiency, low current noise, and a wide range of input and output voltage levels. The low noise and efficient design of the VI-B5M-IV-F4 make it ideal for sensitive applications where noise and efficiency are key.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...