VI-B6B-EW-B1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are electrical circuits that convert direct current (DC) from one voltage level to another, usually from a higher voltage to a lower voltage. The VI-B6B-EW-B1 converter is a type of DC DC converter that utilizes a step-down principle known as Buck Converters. It is designed to take an input voltage of up to 32 VDC and step it down to an output voltage of 12.5 VDC.

The main components in a DC DC Buck Converter are a switching transistor, such as an insulated gate bipolar transistor (IGBT), and an inductor. These components are connected in series with the input and output voltage levels. When the transistor is turned on, current flows from the source voltage into the inductor, thus increasing the stored energy within it. When the transistor is turned off, the energy stored in the inductor is forced back out into the output to provide a regulated Volt-Ampere (VA) output current.

Since the VI-B6B-EW-B1converter is rated at 32 VDC, it can handle a wide range of input voltages. It is ideal for powering lower-voltage applications, from microcontrollers and switches in automotive systems to industrial and consumer applications.

The VI-B6B-EW-B1 converter is also designed to offer high efficiency. It features high-efficiency power factor correction (PFC) to minimize power losses, as well as advanced maximum power point tracking (MPPT) to optimize the output current according to the input voltage. The converter also has built-in protections to prevent the device from overloading, short-circuiting, or being damaged by output voltage spikes.

The VI-B6B-EW-B1 converter is designed with an adjustable switching frequency ranging from 200 kHz to 600 kHz. This allows the user to adjust the frequency to achieve the desired efficiency, noise, and other performance characteristics. The switch frequency can also be adjusted to minimize the audible noise generated by the device.

The VI-B6B- EW-B1 converter is also designed to offer a wide selection of features for better system performance. It has built-in over-temperature protection, integrated EMI filters, and over-current protection. It can also be interfaced with remote control systems via its I2C communication bus.

The VI-B6B-EW-B1 converter is a versatile and reliable device that is suitable for a wide range of applications. Its high efficiency and wide array of features make it an ideal choice for a wide range of low-voltage DC power needs.

The specific data is subject to PDF, and the above content is for reference