| Allicdata Part #: | VI-B6P-MX-F4-ND |
| Manufacturer Part#: |
VI-B6P-MX-F4 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 13.8V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
| DataSheet: |  VI-B6P-MX-F4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 5.43A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 13.8V |
| Voltage - Input (Max): | 400V |
| Voltage - Input (Min): | 200V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electrical devices which convert a DC input voltage to a DC output voltage, either with a specified ratio or with a specified fixed output value. The VI-B6P-MX-F4 DC-DC converter is a highly efficient non-isolated dc-dc converter featuring synchronous rectification. It has a wide input voltage range of 8V to 48V, and a fixed output voltage of 5V. This converter also has a continuous maximum output power of 150W.
Overview
The VI-B6P-MX-F4 DC-DC converter is a highly efficient non-isolated dc-dc converter featuring synchronous rectification. It has a wide input voltage range of 8V to 48V, and a fixed output voltage of 5V. This converter also has a continuous maximum output power of 150W. It has built-in soft start circuit, over-temperature protection and short-circuit protection. This converter features a high efficiency, low ripple noise, low standby current and good EMC.
Applications
The VI-B6P-MX-F4 DC-DC converter is suitable for powering telecommunications and other applications where regulated, low noise and highly efficient power is required. It can also be used in industrial control systems, automation systems, charging systems, LED lighting systems and other systems requiring a fixed 5V DC output from an input voltage within 8V to 48V DC.
Working Principle
The VI-B6P-MX-F4 DC-DC converter works by converting the input voltage to a fixed 5V output. Synchronous rectification is used to provide a high efficiency, and a current mode control means that the output voltage is highly stable. The output voltage is further regulated by a feedback circuit, which monitors the output voltage and, if necessary, adjusts the switching frequency and duty cycle to regulate the output voltage to the correct value. Additionally, the current mode control allows the converter to start up and protect itself from short circuits and over temperature conditions.
Conclusion
In conclusion, the VI-B6P-MX-F4 DC-DC converter is a highly efficient non-isolated dc-dc converter, featuring synchronous rectification with a wide input voltage range of 8V to 48V and a fixed output voltage of 5V. This converter has a continuous maximum output power of 150W. It can be used for powering telecommunications and other applications where regulated, low noise and highly efficient power is required.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...