Allicdata Part #: | VI-B6V-EY-ND |
Manufacturer Part#: |
VI-B6V-EY |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 8... |
DataSheet: | VI-B6V-EY Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 200V |
Voltage - Input (Max): | 400V |
Voltage - Output 1: | 5.8V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 8.62A |
Power (Watts): | 50W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -10°C ~ 85°C |
Efficiency: | 88% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
The VI-B6V-EY is a medium-power dc-dc converter with a wide range of applications and working principle. It is capable of converting a dc voltage to another DC voltage, usually higher or lower, at a different power level. This type of converter is widely used in many different industries and applications, such as in the automotive industry for powering sensors or modules, the telecommunication industry for powering RF transmitters and receivers, and the medical industry for powering medical equipment.
Applications
The VI-B6V-EY DC-DC converter is most commonly used in industrial, telecom, automotive, and medical applications. In industrial applications, it is used to convert high voltage or high current into low voltage and low current. This allows machines to be powered in places that have limited power sources. It is also used in the automotive industry for powering various sensors, modules, and pumps. In the telecommunication industry, the converter is used to power RF transmitters and receivers. In the medical industry, the converter can be used to power medical equipment, such as diagnostic machines and medical imaging devices.
Working Principle
The working principle of the VI-B6V-EY DC-DC Converter is fairly simple. It takes an incoming DC voltage and reduces or increases it to the desired voltage. The converter consists of an AC/DC rectifier to convert the incoming AC voltage to DC. Next, it uses a power electronic switch, typically a MOSFET, to control the current flow. Then, it passes the current through an inductor or transformer to increase or decrease the voltage. Finally, it uses a diode and a capacitor filter to reduce unwanted noise and ripples.
Conclusion
The VI-B6V-EY DC-DC converter is a medium-power converter with a wide range of applications. It is mainly used in industrial, telecom, automotive, and medical applications for powering various devices. It works by rectifying incoming AC voltage to DC voltage, controlling the current using a power switch, and using an inductor or a transformer to increase or decrease the voltage. Finally, a diode and capacitor filter reduces or removes the noise and ripples in the voltage.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...