Allicdata Part #: | VI-B6V-IU-F4-ND |
Manufacturer Part#: |
VI-B6V-IU-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 200W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 3... |
DataSheet: | VI-B6V-IU-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 34.48A |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 200W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 400V |
Voltage - Input (Min): | 200V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are important components of an electrical circuit that enable the transfer of power between two or more DC circuits. They are used to step up or step down the voltage or current of the power source. The VI-B6V-IU-F4 is a type of DC-DC converter that is used for transferring power from one DC power source to another DC power source. It can be used for a variety of applications, including power conversion, motor control, power supply control, or other precision control applications.
The VI-B6V-IU-F4 is a constant voltage converter, which means it outputs a fixed voltage. This is the same as the input voltage, but at a lower current. The VI-B6V-IU-F4 is a switching frequency converter, which enables it to convert the input voltage to a constant output voltage with very high efficiency. The maximum output voltage is 6V, with a continuous load current of 3A.
The VI-B6V-IU-F4 has two modes of operation: continuous and discontinuous. The output voltage is maintained in the continuous mode while the current is stepped up and down in the discontinuous mode. In both cases, the output voltage is always kept within the specified range.
The VI-B6V-IU-F4 has a wide range of applications in many fields. It can be used in solar energy systems to step up or step down the output voltage. It can also be used in motor control and power supply control. In motor control applications, it is used to regulate the voltage of the motor, which helps to ensure a consistent speed and torque. It is also used to control power supplies in precision control applications.
The working principle of a VI-B6V-IU-F4 DC-DC converter is fairly simple. It takes an input voltage and then uses a switching converter to convert it to a different output voltage. The output voltage is then regulated by a special controller, which controls the switches to ensure that the output voltage does not exceed the specified range. The converter then compensates for voltage fluctuations, allowing for stable output voltages. The efficiency of the converter is maximized because the switching process takes place at a high speed and requires minimal power.
The VI-B6V-IU-F4 is a highly versatile and efficient converter that is widely used in many fields. It can be used to step up or step down the voltage of a power source or to control motor and power supply applications. By using a special controller, it can maintain a constant output voltage, even when input voltage fluctuations are present. This makes it especially suitable for use in precision control and power management applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...