Allicdata Part #: | VI-B6X-MY-F3-ND |
Manufacturer Part#: |
VI-B6X-MY-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.2V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.2V 9... |
DataSheet: | VI-B6X-MY-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 9.62A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.2V |
Voltage - Input (Max): | 400V |
Voltage - Input (Min): | 200V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are electrical power conversion systems that convert power from one DC voltage level to another DC voltage level. They are used in a wide range of applications, including providing power to sub-systems from a battery, providing a regulated voltage for microprocessors or supporting communication systems.
The VI-B6X-MY-F3 is a kind of DC DC converter specially developed for use with Microcontrollers and Microprocessors. It serves as an interface between the Microcontroller and other devices. Its applications range from automotive, consumer electronics and industrial applications to medical and renewable energy.
The VI-B6X-MY-F3 converts a wide range of DC voltages input into a regulated output voltage within a range of 2.1 to 5.3V. It is high efficiency and low noise and is fully isolated for both EMI reduction and protection against excess current. The VI-B6X-MY-F3 also offers excellent protection against short-circuits, overloads and overvoltage.
The working principle behind the VI-B6X-MY-F3 is that it uses a switch-mode topology to convert an input voltage into a regulated output voltage. The switching rate is dependent on the input and output voltage, current and temperature condition. The VI-B6X-MY-F3 also uses an auxiliary winding to provide regulation characteristics. This winding helps to provide a more steady output voltage.
The VI-B6X-MY-F3 makes use of a control circuit to monitor and regulate the output voltage and current. This control circuit also ensures that the output is in the safe operating range of the applications it is being used in. The VI-B6X-MY-F3 also has a synchronous rectifier, which helps to reduce power consumption and make the output more efficient.
The VI-B6X-MY-F3 is also very accurate in terms of its output voltage regulation. It has a tolerance level of ±2%, meaning that it can maintain a steady output voltage even when the input voltage fluctuates. In addition, the VI-B6X-MY-F3 also features a soft-start capability, which helps to reduce the inrush of current when the power is switched on.
In short, the VI-B6X-MY-F3 is an ideal choice for applications which require a regulated and steady output voltage. It is highly reliable, has excellent protection features and is highly efficient. Whether it is for automotive, industrial or medical applications, the VI-B6X-MY-F3 has the capabilities to meet nearly any application requirement.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...