| Allicdata Part #: | VI-B7M-CW-F4-ND |
| Manufacturer Part#: |
VI-B7M-CW-F4 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 10V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 10V 10... |
| DataSheet: |  VI-B7M-CW-F4 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 10A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 10V |
| Voltage - Input (Max): | 375V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electronic power conversion devices that convert electrical energy from one direct current input voltage to a different direct current output voltage. One such converter is the VI-B7M-CW-F4. This converter works by converting the input DC voltage to a pulsed output current, and then to a different output voltage using switch mode technology.
The VI-B7M-CW-F4 is a step down DC-DC converter with an input range of 4.5-60V DC and an output range of 5V DC. It has an efficiency of up to 85%, with a switching frequency of 400KHz, and offers 10A of output current. The converter is also designed with over temperature, over voltage and over current protections for added safety.
The VI-B7M-CW-F4 is suitable for a wide range of applications. It can be used for powering data storage, lighting, POE, communications, automotive, telecoms and industrial automation equipment. Its small size and light weight makes it ideal for applications where space and weight are a concern. The device is also designed for ultra low EMI radiation to reduce interference with radios and other nearby electronics.
The working principle of the VI-B7M-CW-F4 is based on switch mode technology. This type of converter uses two switches, an inductor and a capacitor to create the output voltage. The input voltage is first converted to a pulsed output current. This output current passes through the inductor, where it is stored and then released in series with the capacitor. The output voltage is then formed from the combination of the inductor and capacitor. This type of converter is advantageous over traditional linear mode converters as it is more efficient, more compact and lighter in weight.
In conclusion, the VI-B7M-CW-F4 is a low noise, high efficiency DC-DC converter designed for a wide variety of applications. It has a wide input range of 4.5-60V DC and a fixed output voltage of 5V DC. with 10A of maximum output current. The converter is also designed with over temperature, over voltage and over current protectors for increased safety. This converter operates on switch mode technology, which makes it more efficient, more compact and lighter in weight than traditional linear mode converters.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...