Allicdata Part #: | VI-B7X-MY-F2-ND |
Manufacturer Part#: |
VI-B7X-MY-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.2V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.2V 9... |
DataSheet: | VI-B7X-MY-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 9.62A |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.2V |
Voltage - Input (Max): | 375V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters, often referred to as power converters, are devices that convert direct current (DC) electrical power from one voltage level to another. This is done by either increasing or decreasing the voltage or both (or current in the case of a transformer). The VI-B7X-MY-F2 is a type of DC-DC converter that is designed to continuously convert a low DC voltage into a higher-output DC voltage. The primary applications for this converter are in power supplies, motor controls, and other applications requiring a high DC voltage. The primary working principle behind this converter is that it uses a resistor-capacitor (RC) filter to reduce the voltage ripple and also utilizes an active voltage regulator to maintain an accurate and stable output voltage.
The VI-B7X-MY-F2 converter uses a unique switching technique to step up a low input voltage to a high output voltage. It runs at a switching frequency of up to 300 kHz and uses an advanced input and output stage to maximize power efficiency and power conversion accuracy. The input voltage is first rectified using a pair of Schottky diodes and then fed into the switching stages. The switching stages use a special switching technique to convert the input voltage into a higher output voltage. The output is then filtered and regulated to produce a consistent output voltage.
The VI-B7X-MY-F2 converter is very flexible as it can be used with both isolated and non-isolated input/output systems. It is also highly efficient with up to 94.6% efficiency. The converter also has a wide operating temperature range of -40°C to +85°C, making it ideal for use in a variety of environments. It also has a very low power consumption and low thermal resistance, allowing it to operate with minimal power losses.
In conclusion, the VI-B7X-MY-F2 DC-DC converter is an excellent choice for a wide range of power supply and motor control applications. It is easy to use, highly efficient, and operates over a wide temperature range. Its flexibility, low power consumption, and low thermal resistance make it an ideal choice for many power supply and motor control applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...