Allicdata Part #: | VI-BND-IU-F2-ND |
Manufacturer Part#: |
VI-BND-IU-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 85V 200W |
More Detail: | Isolated Module DC DC Converter 1 Output 85V 2.... |
DataSheet: | VI-BND-IU-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 36V |
Voltage - Input (Max): | 76V |
Voltage - Output 1: | 85V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 2.35A |
Power (Watts): | 200W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -40°C ~ 85°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Series: | VI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are designed to convert a dc power source from one voltage level to another. There are many types of dc-dc converters available on the market, such as buck converters, boost converters, buck-boost converters, flyback converters, and VI-BND-IU-F2 converters. This article will focus on the application field and working principle of VI-BND-IU-F2 converter.
VI-BND-IU-F2 converters are coreless DC-DC power converter solutions for low voltage applications. They provide 100% efficiency over a wide range of input and output voltages, reducing power consumption and offering high performance. VI-BND-IU-F2 converters are typically used for automotive, industrial, medical, LED lighting, and telecommunications applications.
VI-BND-IU-F2 converters work by rectifying the input voltage and converting it into a regulated output voltage. The conversion is done using a pulse width modulation, or PWM, control. This switching circuit allows the output voltage to be regulated by varying the width of the pulses applied to the converter, allowing it to maintain a fixed output voltage despite variations in the input voltage. The input voltage is typically rectified using a full bridge rectifier and filtered using a passive filter. After the voltage has been rectified and filtered, it is then sent to the control circuit, which uses a PWM to control the output voltage.
VI-BND-IU-F2 converters also use a variety of protection features to ensure that the output voltage remains stable and safe. These protection features include undervoltage lockout, overvoltage protection, over temperature protection, and input reverse polarity protection. These features are designed to protect the converter from damage due to improper operation or environmental conditions.
VI-BND-IU-F2 converters provide an efficient and cost-effective solution for low voltage applications, and are used in a variety of industries. The converters are highly reliable and offer a high level of protection against damage due to improper operation. This makes them an ideal choice for those looking to reduce power consumption and improve performance.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...