VI-BNL-EX-F4

Current - Output (Max):	2.68A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	28V
Voltage - Input (Max):	76V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>DC-DC converters play an important role in many electronic devices, providing a steady and easily controllable power source for the internal circuits. The VI-BNL-EX-F4 DC-DC converter is a small, lightweight and reliable switching regulator. It is commonly employed in applications such as automotive, industrial, consumer and commercial.</p><p>The VI-BNL-EX-F4 transfers energy from a DC supply to an adjustable DC output voltage. It accurately adjusts the output voltage, allowing designers to adapt the output of the power source to the variable voltage requirements of the system. This makes the VI-BNL-EX-F4 an efficient way to maximize efficiency in power-critical systems.</p><p>The VI-BNL-EX-F4 DC-DC converter is a flyback topology switching regulator. The output voltage is regulated by switching the input voltage ON and OFF at a precise rate, allowing the energy consumption to stay well within the required parameters. The switching frequency of the VI-BNL-EX-F4 ranges from 8kHz to 200kHz, depending on the required output voltage.</p><p>The VI-BNL-EX-F4 provides an easy-to-control and reliable power source, using pulse-width modulation (PWM) or burst mode topologies to regulate the output voltage. It is capable of withstanding input voltages up to 30V and can supply up to 20A of output current.</p><p>The VI-BNL-EX-F4 is available in an easy-to-mount, surface-mount configuration, compatible with many printed circuit boards. The board features an open-drain resistor to ground the excess current, as well as protection against inrush current and short circuits, preventing any potentially damaging currents from getting into the system.</p><p>The VI-BNL-EX-F4 is an efficient way of supplying power to a range of electronic devices, from automotive and consumer products to industrial and commercial systems. It is a lightweight solution, with a compact form factor, and provides an adjustable, steady voltage supply. The VI-BNL-EX-F4 is ideal for applications in which cost is a priority, as it leaves plenty of room for designers to optimize their designs.</p>

The specific data is subject to PDF, and the above content is for reference