Allicdata Part #: | VI-BT1-CX-F3-ND |
Manufacturer Part#: |
VI-BT1-CX-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 12V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 12V 4.... |
DataSheet: | VI-BT1-CX-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 4.17A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 12V |
Voltage - Input (Max): | 160V |
Voltage - Input (Min): | 66V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are widely used in various industries. As an important branch of them, the VI-BT1-CX-F3 series had been giving much convenience for the market. In this article, an introduction of the application field and the working principle of this series will be revealed.
VI-BT1-CX-F3 is a type of bi-directional charge-discharge controllers. It is a fully integrated, high-performance, and robust solution for any application that requires bidirectional power transfer between a battery and a generator or grid. The charge-discharge controllers are made up of special switched-mode power supplies for usually higher power. It is responsible for charging, discharging, and protection of the connected battery.
The typical application field of this series is for Uninterruptible Power Supply (UPS), Solar Electric Power Systems (SEPS), Telecom power systems, Grid-connected photovoltaic inverters, Aircraft onboard energy distribution systems, Electric Vehicle power systems (EVPS), Diesel/Gasoline generators, and many other applications.
As to the working principle, VI-BT1-CX-F3 mainly consists of a high-frequency PWM (Pulse Width Modulation) DC-DC converter and an advanced control IC. The function of the PWM converter was to provide a regulated power output from a given input power supply source. The control IC was basically a logic circuit with advanced functions such as generating the reference of the PWM output, comparing the reference and feedback of the output signal, and controlling the switching device. It can coordinate with the communication control module and the monitor module to realize the software-based energy control.
The VI-BT1-CX-F3 series can provide several benifits for the application field, such as greatly improved efficiency, minimized power losses, and easier regulation of the output power. The working principle of the series is to use the rectified battery power as input, and transfers the energy to the DC-DC converter and the control IC. Then, the PWM converter will convert the energy from the battery to the desired output voltage and the control IC will convert the voltage to the appropriate current and frequency. In this way, the VI-BT1-CX-F3 series can provide a reliable and efficient DC-DC power conversion device.
In summary, the VI-BT1-CX-F3 series is an efficient and reliable DC-DC converter for various applications. With the advantages of efficient power conversion, low power losses, and easy regulation of the output power, it has gained more and more popularity in the field of power conversion. It is a perfect device for those who are seeking reliable and efficient DC-DC converters.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...