Allicdata Part #: | VI-BT1-CY-F3-ND |
Manufacturer Part#: |
VI-BT1-CY-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 12V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 12V 4.... |
DataSheet: | VI-BT1-CY-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 4.17A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 12V |
Voltage - Input (Max): | 160V |
Voltage - Input (Min): | 66V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters, such as VI-BT1-CY-F3, are used to convert a direct current (DC) voltage to a different, desired voltage. They are commonly used in electronic devices, such as laptops, cell phones and other portable electronic devices, to supply the required power. This type of converter works by taking the input voltage and transforming it into an output voltage that is higher or lower than the input voltage. This process is known as buck-boost conversion.
VI-BT1-CY-F3 is a small, efficient DC-DC converter designed for use in portable devices powered by a single cell battery. It operates using an input voltage range of 2.2 to 5.5 volts and provides an output voltage range of 3.3 to 15 volts. The converter has a high efficiency rating of up to 94 percent and a low standby current of only 200 uA. The output voltage can be varied using a microcontroller, allowing the device to be powered with a different output voltage depending on the requirement. This makes it suitable for use in applications such as digital cameras, medical devices, and laptop adapters, where the power needs to be regulated for proper functioning. The converter also features over-current, over-temperature and short-circuit protection, with an auto-recovery after the fault is removed.
The working principle of the VI-BT1-CY-F3 converter is based on the buck-boost conversion technique. This is achieved by using an integrated PWM (Pulse-width Modulation) control circuit. PWM is used in many electronic control applications to regulate the power or voltage that is supplied to the device. The PWM technique involves the application of alternating general-purpose pulses where the pulse width is set to regulate the output voltage. The PWM pulses are generated by a power MOSFET switch, which is controlled by the integrated control circuit. The control circuit monitors the input voltage and adjusts the PWM pulses accordingly to keep the output voltage within the specified range.
The VI-BT1-CY-F3 converter has a wide variety of applications, ranging from medical equipment to consumer electronics. It is ideal for applications that require a variable and regulated output voltage such as voltage stabilizers, converters for LED lighting, robotic applications, and automotive applications. It can also be used to boost the performance of portable electronic devices, such as tablets and laptops, by providing a regulated output voltage despite fluctuations in the input voltage. This type of converter is also used in solar power systems, where it is used to boost the output voltage of the solar panel in order to achieve the desired output voltage.
The VI-BT1-CY-F3 converter is a reliable, efficient and cost-effective solution for providing a regulated output voltage from a DC source. It is easy to install and can be used in a number of applications. The converter is designed to provide high efficiency and low standby current, making it suitable for portable applications. It can also be used as a voltage regulator or boost converter for low voltage applications, making it a versatile and reliable option for both portable and stationary applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...