| Allicdata Part #: | VI-BTH-CY-F1-ND |
| Manufacturer Part#: |
VI-BTH-CY-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 52V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 52V 96... |
| DataSheet: |  VI-BTH-CY-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 962mA |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 52V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.DC-DC converters are electronic devices that convert and regulate Direct Current (DC) voltage from one level to another. By adjusting the input voltage, they enable the user to obtain different output voltages, allowing for various applications. VI-BTH-CY-F1 is a type of DC-DC converter, and its application field and working principle are described in the following section.
VI-BTH-CY-F1 Application Field
VI-BTH-CY-F1 is a DC-DC converter specially designed for high-efficiency photovoltaic systems. It is suitable for use in solar energy systems with power requirements between 1000 W and 10000 W. It can be used for a wide range of photovoltaic system applications, including residential, commercial, and industrial applications. In addition, it has a wide operating temperature range from -40℃ to 85℃, making it suitable for both indoor and outdoor use.
VI- BTH-CY-F1 Working Principle
VI-BTH-CY-F1 is based on a proprietary PFC (Power Factor Correction) circuit. It works by first converting the Direct Current (DC) photovoltaic power from the solar panel into Alternate Current (AC) power. Then, it uses a high-efficiency AC-DC Buck converter to step-down the AC voltage to the desired output voltage. The output voltage can be adjusted by a dedicated potentiometer. Finally, the output DC voltage is filtered and regulated by an LC filter to remove any noise and ensure a stable output.
Additionally, the device has an integrated short-circuit, overload and over-voltage protection to ensure the safety of the system. The indicator LED will alert the user when the protection limit is exceeded, so that the system can be safely shutdown or reconnected.
In summary, VI-BTH-CY-F1 is a DC-DC converter specifically designed for use in photovoltaic systems. With a wide operating temperature range, high efficiency, and comprehensive protection features, it is an ideal solution for photovoltaic systems. And its application and working principle have been described in detail in this article.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...