| Allicdata Part #: | VI-BTH-CY-F2-ND |
| Manufacturer Part#: |
VI-BTH-CY-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 52V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 52V 96... |
| DataSheet: |  VI-BTH-CY-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 962mA |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 52V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used to convert a DC source voltage into an controlable DC output voltage. High-power devices can be operated from converters that accept a wide range of input voltages. VI-BTH-CY-F2 is a DC-DC converter specially designed for increased power output and improved efficiency.
This converter features an input voltage range of 18.5V to 75V, an output current of up to 4A and an output voltage of up to 36V. It can be configured to operate in different modes, including buck, boost, and forward-buck-boost, offering a wide range of applications.
VI-BTH-CY-F2 is a switching-mode DC-DC converter which, just like other DC-DC converters, works by switching the DC current on and off in a controlled manner. The two basic functions of switching-mode converters are power conversion and voltage control. The controlling of the output voltage is done by modulating the on-off control of the switch, depending on the type of converter.
The VI-BTH-CY-F2 utilizes pulse-width modulation (PWM) to control the output voltage. This is achieved by charging and discharging the output capacitors at specific intervals, modulating the duty cycle of the switch. This allows it to achieve a constant output voltage in the presence of varying input voltages.
The VI-BTH-CY-F2 is designed for use in a wide range of applications, such as for battery charging, LED lighting, and DC motor control. In battery charging, it is used to provide a constant output voltage to charge the battery, while in LED lighting, it is used to provide adjustable output voltage for the LED modules. Finally, in motor control applications, it is used to provide adjustable output voltage for controlling the speed and torque of the motor.
The VI-BTH-CY-F2 is a high-performance DC-DC converter that provides a wide range of applications. It utilizes pulse-width modulation to accurately control the output voltage, allowing it to be used in a wide variety of applications. Moreover, its small size and low cost make it ideal for many applications where energy efficiency and performance are critical.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...