| Allicdata Part #: | VI-BTH-EV-F3-ND |
| Manufacturer Part#: |
VI-BTH-EV-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 52V 150W |
| More Detail: | Isolated Module DC DC Converter 1 Output 52V 96... |
| DataSheet: |  VI-BTH-EV-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 962mA |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 150W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 52V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The VI-BTH-EV-F3 DC-DC converter is a efficient and advanced power supply technology used in various industrial and energy conversion applications. It is designed to provide accurate and reliable power conversion for various loads, with minimal power losses.
This product is highly effective at converting direct current (DC) energy into alternating current (AC) energy, with minimal power losses. It is available in various sizes and configurations, with input voltage ranges from 0-200 volts. In addition, the unit is also capable of both step-up and step-down conversions. The VI-BTH-EV-F3 DC-DC converter’s feature compact size, low power loss, and high efficiency.
The input voltage is applied to the device’s two terminals, and the output voltage is output from the two remaining terminals. The device consists of a main switch, a transformer and a diode bridge rectifier. The switch is used to regulate the voltage and current which allows the device to operate efficiently and accurately.
When the switch is in the ON state, the switch creates a negative voltage across the transformer, which causes the current to flow from the transformer’s primary to the secondary. This current then passes through the diode bridge rectifier, which acts as a filter and removes any AC ripple from the output. The resulting output is a clean and regulated DC voltage which can be used in the desired application.
The VI-BTH-EV-F3 DC-DC converter is used in various applications such as battery charging, solar energy conversion, lighting control, motor control, HVAC, industrial control and other energy conversion applications. It can be used to efficiently convert low voltage DC sources into higher voltage AC sources, such as when powering large AC motors, or for powering high power LED lighting systems.
The VI-BTH-EV-F3 DC-DC converter is highly efficient and reliable. Its advanced power conversion technology provides accurate and precise operation, with minimal power losses. The unit is also designed to be small in size and light in weight to allow for easy installation. With its wide range of capabilities and features, this DC converter is an ideal choice for power conversion and energy conversion applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...