VI-BTK-EX-S

Current - Output (Max):	1.25A
Size / Dimension:	4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	40V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction: DC-DC converters are electrical circuits used to convert direct current (DC) from one voltage level to another. VI-BTK-EX-S is a type of DC-DC converter whose purpose is to convert a DC voltage from one voltage level to another, such as from 12 volts to 24 volts or from 24 volts to 48 volts. Application Field: VI-BTK-EX-S converters are most commonly used in applications such as automotive, aerospace, and industrial control applications. In automotive applications, they are used in electric vehicles, and in aerospace applications, they can be used in satellites to control the power supply and to regulate voltage levels in different systems. They are also used to regulate voltages in industrial control systems, such as control boards, which require precise levels of voltage for operation. Working Principle: The VI-BTK-EX-S works by using a switching power supply to convert a DC voltage from one voltage level to another, usually from lower voltage levels to higher voltage levels. The VI-BTK-EX-S is able to convert a DC voltage from one voltage level to another because it uses two transistors in a bridge configuration that are connected to an inductor. This bridged configuration allows for the conversion of a DC voltage from one voltage level to another. The VI-BTK-EX-S is composed of several components that work together to convert a DC voltage. The primary component is the power switch, which is used to control the flow of current through the converter. The power switch is connected to the primary side of the inductor, while the secondary side of the inductor is connected to the transformer, which is then connected to a diode rectifier and finally the output voltage level. The power switch is controlled by either a PWM signal or an analog voltage signal, depending on the particular type of converter. When the signal is applied to the power switch, it turns the switch on and off in a controlled fashion. This causes an alternating current to be generated in the primary side of the inductor, which then induces a current in the secondary side of the inductor. This alternating current is then rectified by the diode rectifier, resulting in a DC output voltage that is the desired voltage level.Conclusion: VI-BTK-EX-S converters are an important type of DC-DC converter that are used in a variety of applications, such as automotive and aerospace. They are composed of a power switch, an inductor, a transformer, and a diode rectifier, and their purpose is to convert a DC voltage from one voltage level to another. Depending on the type of converter, the power switch can be controlled by a PWM signal or an analog voltage signal, and the resulting alternating current is then rectified by the diode rectifier to yield the desired output voltage level.

The specific data is subject to PDF, and the above content is for reference