Allicdata Part #: | VI-BTK-EY-F4-ND |
Manufacturer Part#: |
VI-BTK-EY-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 40V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 40V 1.... |
DataSheet: | VI-BTK-EY-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.25A |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 40V |
Voltage - Input (Max): | 160V |
Voltage - Input (Min): | 66V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters provide an efficient way of converting electric power from one DC voltage level to another. They are typically smaller compared to other types of converters, and have numerous applications, ranging from industrial applications to consumer electronics. VI-BTK-EY-F4 is a type of DC-DC converter, and this article will discuss its application field and working principles.
VI-BTK-EY-F4 is an offline single-phase mains-fed DC-DC converter. It is designed to meet all requirements of EN 61558-2-3 and IEC 60950-1 safety standards. The device is mostly used in consumer electronics applications where the mains voltage is delivered directly to the load. It is also suitable for industrial applications that require a voltage conversion between 18V to 550V DC. The VI-BTK-EY-F4 converter consists of a Step-down Transformer, Control Rectifier Bridge, and Control IC.
In terms of application field, The VI-BTK-EY-F4 converter is used primarily in consumer electronics and industrial applications to convert high voltage levels from AC mains into DC voltage levels for various electric devices. It is suitable for a wide variety of electronic products, including TVs, audio equipment, kitchen appliances, projectors, surveillance systems, medical equipment, etc.
The working principle of the VI-BTK-EY-F4 converter is relatively simple. First, the alternating current from the mains is step-down by the transformer and then rectified by the control rectifier bridge. The rectified output is then filtered by an LC filter where the regulator IC then controls the output voltage. The output voltage is regulated by monitoring the reference voltage from the regulator IC and then adjusting the duty cycle of the controlled rectifier bridge accordingly. In this way, the VI-BTK-EY-F4 converter is able to maintain its output voltage within a specified level even when the mains voltage fluctuates.
Overall, the VI-BTK-EY-F4 converter is an efficient and reliable DC-DC converter used for various consumer electronics and industrial applications. The device is capable of maintaining its output voltage within a specified level, even when the input voltage fluctuates. Therefore, its reliability and robustness make it an ideal choice for applications that require reliable and efficient voltage conversion.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...