Allicdata Part #: | VI-BTK-IX-F4-ND |
Manufacturer Part#: |
VI-BTK-IX-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 40V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 40V 1.... |
DataSheet: | VI-BTK-IX-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.25A |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 40V |
Voltage - Input (Max): | 160V |
Voltage - Input (Min): | 66V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VI-BTK-IX-F4 application field and working principle
The VI-BTK-IX-F4 is a DC DC converter built by established factory VI-BTK-IX. It is an economical solution for medium power applications. It has a wide range of applications and is ideally suited for residential, commercial, industrial and automotive usages. The VI-BTK-IX-F4 is specifically designed to provide exceptional power efficiency with minimal heat generation. It can handle a wide range of input and output voltages with tight regulation up to 70% duty cycle.
Applications
The VI-BTK-IX-F4 is most suitable for applications that require a high power efficiency with minimal EMI/RFI and heat dissipation. It is well-suited for medium power applications such as DC/DC power supplies, motor drives, servo drives, high-output amplifiers, motion controllers, lighting systems, warning systems, etc. The VI-BTK-IX-F4 is particularly useful for low-noise applications such as audio equipment, high voltage switching devices, and portable power devices.
Working principle
The VI-BTK-IX-F4 uses a buck converter topology, in which a power switch is used to regulate input and output currents with a closed-loop feedback system. When the input voltage exceeds the output voltage, the power switch is activated, allowing current to flow through a power diode from the input and into the output load. The power switch is then turned off, ending the conduction and discharging the load capacitor to begin the process again. The frequency of the power switch is set by a controller, allowing the user to adjust voltage and current levels, as well as set the power switch frequency.
The VI-BTK-IX-F4 also features over-voltage protection, current limit protection, and over-temperature protection. The over-voltage protection keeps the voltage from exceeding a certain levels, while the current limit protection prevents current from exceeding the maximum load current. Finally, the over-temperature protection turns off the power switch if the temperature of the system rises to a predetermined level. This ensures that the system remains cool and safe for operation.
Conclusion
The VI-BTK-IX-F4 is an ideal device for a wide range of applications. It offers exceptional power efficiency with minimal heat generation. It is very useful for low-noise applications and is well-suited for DC/DC power supplies, motor drives, servo drives, and other medium power applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...