VI-BTL-MX-F1

Current - Output (Max):	1.79A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	28V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC Converters are a type of electronic device used for converting a DC voltage from one value to another, usually from higher to lower. The most commonly used DC to DC converters are referred to as ‘VI-BTL-MX-F1’ applications. This type of DC to DC converter is used in a variety of applications, including in power supplies, battery chargers, and UPS systems.The VI-BTL-MX-F1 DC to DC converter is a full-bridge rectifier (FBR) with integrated magnetic power delivery. It is designed to be used as a high efficiency, low cost solution for transferring power between two DC voltage systems. The converter is rated for operation over a wide voltage range, from 3.3V to 28V and it is capable of delivering up to 93.5% efficiency. This makes it suitable for a wide range of applications, including applications that require high efficiency, high reliability, and long life.The VI-BTL-MX-F1 DC to DC converter works by rectifying the input voltage into a pulsed signal and then rectifying it again to deliver the desired output voltage. This type of converter requires dedicated input components (such as inductors) to properly shape the pulses, so that the desired output voltage can be achieved. The converter also has a number of other features, such as soft-start, over-voltage protection, over-current protection, and short-circuit protection.The VI-BTL-MX-F1 DC to DC converter is designed to be easy to install and use and has been used for a variety of applications. In power supplies, the converter can be used to convert AC power to DC power for devices such as computers and servers. In battery chargers, the converter can be used to rapidly charge the battery, while providing over-charge protection. The converter can also be used in UPS systems, providing a reliable source of power even in the event of a power failure.Overall, the VI-BTL-MX-F1 DC to DC converter can be used in many applications, due to its high efficiency, its high reliability, and its ease of installation and use. This type of converter is ideal for applications that require a large amount of power to be delivered rapidly and efficiently. It is also an ideal solution for low powered applications, where power efficiency is critical.

The specific data is subject to PDF, and the above content is for reference