| Allicdata Part #: | VI-BTN-CW-F3-ND |
| Manufacturer Part#: |
VI-BTN-CW-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 18.5V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
| DataSheet: |  VI-BTN-CW-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 2.7A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 18.5V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC-DC converters, also known as voltage regulators or DC power converters, are devices that convert direct current (DC) in one value of voltage into another value of voltage. DC-DC converters are used in applications such as the regulation of battery voltage, the power supply of various electronic circuits, and the efficient utilization of energy.
VI-BTN-CW-F3 Application Field
The VI-BTN-CW-F3 DC-DC converters are used mainly in distributed power supply equipment, communication systems, automotive electronic control systems, electric tools, and industrial controllers. It is capable of both input and output voltage regulation in order to meet the requirements of different application scenarios.
VI-BTN-CW-F3 Working Principle
The VI-BTN-CW-F3 DC-DC converters are built on a flyback converter topology. This topology uses a primary side switching transistor and an auxiliary winding to turn on the secondary side rectifier and filter capacitor. The primary side switching transistor is used to control the input voltage and the feedback loop circuit is used to control the output voltage. When the input voltage increases, the feedback loop will reduce the voltage difference between the input voltage and the output voltage, thus maintaining the output voltage at a constant voltage. Similarly, when the input voltage decreases, the feedback loop will increase the voltage difference between the input voltage and the output voltage, thus maintaining the output voltage at a constant voltage.
VI-BTN-CW-F3 Advantages
The VI-BTN-CW-F3 DC-DC converters offer a number of advantages to users. Due to its electronic feedback controlling system, it offers high accuracy and stability, as well as good temperature compensating capability. Additionally, its efficiency is greater than 97%, allowing for higher power density. Furthermore, its power factor is greater than 0.98, signalling low noise and very few humming noises.
Conclusion
In conclusion, the VI-BTN-CW-F3 DC-DC converter is a reliable and efficient solution for the regulation and efficient conversion of DC voltage. Its advantages of accuracy, high efficiency, low noise, and high power density make it an ideal candidate for powering various electronic devices.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...