Allicdata Part #: | VI-BTN-CX-F1-ND |
Manufacturer Part#: |
VI-BTN-CX-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VI-BTN-CX-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 2.7A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 18.5V |
Voltage - Input (Max): | 160V |
Voltage - Input (Min): | 66V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC (direct current) to DC (direct current) converters are a type of electric power converter used to convert an input direct current into a higher or lower level of output direct current. DC to DC converters are both quantitatively and qualitatively different from AC (alternating current) to DC and DC to AC converters. These converters maintain a direct current form of electrical power between two DC circuits.
DC DC converters can be divided into three basic types: switching, linear, and switched capacitor. Switching type converters are the most common, as they are more efficient and provide greater flexibility for different voltage levels than linear or switched capacitor converters. However, they are also more complicated than the other two and require careful regulation and control to maintain the desired steady voltage level.
VI-BTN-CX-F1 is a DC to DC converter based on switching technology. It has a wide range of input voltage levels, from 3V to 80V, and can output up to 50W of continuous power. It is a very reliable, efficient, and robust converter, ideal for use in industrial power applications, automotive electronic systems, and UPS systems.
The working principle of VI-BTN-CX-F1 is based on a pair of push-pull adjustable power transistors - voltage regulators. The input voltage is stepped down using a switching pulse-width modulation (PWM) circuit, then regulated by a pair of voltage regulators. The PWM waveform is adjusted based on the status of the output voltage, and is used to control the switching action of the power transistors, which in turn controls the output voltage. This constant regulation ensures a high level of steady voltage output. The use of this technology eliminates the need for linear or switched capacitor converters, as it is more efficient and requires no additional circuitry.
The main application area for VI-BTN-CX-F1 is industrial power conversion, where reliable power supply is essential. It is also suited for automotive electronic systems and UPS systems, as it is very reliable and efficient. Its wide input voltage range makes it ideal for applications operating in harsh conditions, where the input power is subject to large variations.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...