Allicdata Part #: | VI-BTN-CY-F1-ND |
Manufacturer Part#: |
VI-BTN-CY-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VI-BTN-CY-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 2.7A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VI-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 18.5V |
Voltage - Input (Max): | 160V |
Voltage - Input (Min): | 66V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC Converters are electronic power converting devices used to regulate an electrical power output by converting one direct current (DC) voltage level to another, through an external power source. In the process, energy sources such as batteries and power distribution systems are connected to an output device or system, which is then regulated so that the power delivered to the load is controlled and optimized. The VI-BTN-CY-F1 converter has been developed to provide high power output and better suited for use in distributed power systems and renewable energy applications.
The VI-BTN-CY-F1 is a two-stage step-down DC-DC converter, designed to efficiently convert a 36V input voltage to a 5V output voltage. It has a maximum output power of 10A, and a typical efficiency of 92%. It uses a synchronous buck topology, with high switching frequencies, for better system reliability and improved energy efficiency.
The VI-BTN-CY-F1 converter works by maintaining a constant ground reference voltage, while the output voltage is regulated by adjusting the amount of energy flow at each of the two stages of switching. The converter consists of two main components, the power converter and the regulator. The power converter has two input terminals, one being a voltage source connected to the battery, and the other being an output terminal connected to the load. The regulator is used to control the output voltage of the power converter by adjusting the duty cycle of the switching device. In addition, the power converter uses a number of components, including two phases of the buck converter, a voltage reference, a current sense amplifier, a gate driver, and a switching device.
The VI-BTN-CY-F1 converter has a typical efficiency of 92% when operating at a full load. Its power output is also capable of exceeding 10A, making it suitable for low-voltage, high-current applications. It also features a wide input voltage range, from 12V to 36V, and its control loop is designed to minimize output ripple and enable accurate control of the output voltage. In addition, the converter is protected against over-current and over-voltage conditions, and offers a built-in over-temperature protection with automatic shutdown.
The VI-BTN-CY-F1 converter is suitable for use in distributed power systems and renewable energy applications. Its high efficiency and ability to handle large currents make it an ideal choice for these applications. It can also be used in automotive, medical, industrial, and communication applications, as well as in other applications requiring regulated power supplies.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...