VI-BTN-EV-S

Current - Output (Max):	2.7A
Size / Dimension:	4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	VI-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	18.5V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters are electronic systems which are used to convert a direct current (DC) from one voltage level to another. They are used to provide power to a wide variety of electrical and electronic devices, such as computers, robots, medical devices, and portable electronics. The three primary components used in the conversion of DC power are the boost-type regulator (BTN), the error voltage source (EVS), and the switching regulator (SR). The Boost-Type Regulator (BTN) is the most commonly used type of DC-DC converter. It is used to increase the input voltage value to a higher output voltage level. This can be used in situations where the input voltage is too low to meet the requirements of the load being powered. The boost regulator starts by charging the inductor with current from the input voltage source. This energy is stored in the inductor until the device turns off, allowing the stored energy to be transferred to the output capacitor. The output voltage is then regulated by the feedback system. The Error Voltage Source (EVS) is used to regulate the output voltage level. It is a negative voltage source which helps to limit the output voltage to the required level. The EVS is connected between the output capacitor and the feedback system. It provides a reference voltage which is compared to the output voltage and is then used to adjust the output voltage level.The Switching Regulator (SR) is responsible for controlling the output voltage level. It works by using a set of semiconductor switches to change the duty cycle of the current running through the inductor and capacitor. When the input voltage is higher than the required output voltage, the SR reduces the duty cycle to decrease the output voltage. When the input voltage is lower than the required output voltage, the duty cycle is increased to boost the output voltage.DC-DC converters are used in a wide variety of applications, from consumer electronics to industrial applications. In consumer electronics, DC-DC converters are used to power electronic devices such as DVD players, MP3 players, and laptops. In industrial applications, DC-DC converters are used in power supplying systems for controllable voltage and Current sources, and motor speed control applications.DC-DC converters are also used to provide power to a number of medical devices. Medical devices require a reliable and steady power source in order to function properly. DC-DC converters are used in these applications because they are able to provide a steady output voltage and current, which is necessary to keep the device running at the proper level. In summary, the components used in a DC-DC converter—the boost-type regulator (BTN), the error voltage source (EVS), and the switching regulator (SR)—all work together to provide a reliable power source to a variety of devices. DC-DC converters are used in many applications, from consumer electronics to industrial applications, as well as medical devices.

The specific data is subject to PDF, and the above content is for reference