Allicdata Part #: | VI-BTN-EW-F4-ND |
Manufacturer Part#: |
VI-BTN-EW-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VI-BTN-EW-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 66V |
Voltage - Input (Max): | 160V |
Voltage - Output 1: | 18.5V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 2.7A |
Power (Watts): | 100W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -10°C ~ 85°C |
Efficiency: | 88% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electrical components that can convert one DC voltage level into another. VI-BTN-EW-F4 is a type of DC-DC converter whose application field and working principle make it a great choice for many applications.
Overview
VI-BTN-EW-F4 converters are single-stage, non-isolated, DC-DC power converters. The device operates on a wide input voltage range and provides regulated output voltage. It is capable of either step-up or step-down power conversion.
Application Field
The VI-BTN-EW-F4 can be used for a wide range of applications, such as:
- Battery-powered electronics
- Automotive applications
- Portable electronics
- Remote equipment
- Solar power applications
- Telecommunications
The VI-BTN-EW-F4 is well suited for applications in harsh and demanding environments, due to its excellent reliability and durability.
Working Principle
VI-BTN-EW-F4 converters are based on the buck-boost topology. This generally includes two switching transistors (the upper and lower transistor, also known as the positive and negative transistors), a diode, and an inductor.
The upper and lower transistors are used to switch the input voltage and control the output voltage, and the inductor is used to store energy. The diode will be in forward bias during one part of the switching cycle, and the reverse bias during the other part of the switching cycle.
When the input and output voltages are equal, the converter is in steady-state operation. In the steady state, switching transistors switch at the same time. The inductor current ramps up with the input voltage, and the converters output supply current to the load. When the inductor current reaches a certain level, the converter enters discontinuous mode and the lower transistor is turned off. In this way, the output voltage is regulated.
Conclusion
The VI-BTN-EW-F4 is a single-stage, non-isolated, DC-DC converter capable of both step-up and step-down power conversion. It is designed for use in harsh, demanding environments, and can be used for a wide range of applications. The converter is based on the buck-boost topology, and uses two switching transistors, a diode, and an inductor to regulate the output voltage.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...