VI-BTN-IV-F3

Series:	VI-200™
Packaging:	Bulk
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	66V
Voltage - Input (Max):	160V
Voltage - Output 1:	18.5V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	2.7A
Power (Watts):	150W
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Features:	OCP, OTP, OVP, SCP
Operating Temperature:	-40°C ~ 85°C
Efficiency:	90%
Mounting Type:	Through Hole
Package / Case:	Full Brick
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters

DC-DC converters are an essential component of most electronic systems, as they provide the flexibility to communicate between different DC voltage levels. This article focuses on the VI-BTN-IV-F3 converter application field and working principle.The VI-BTN-IV-F3 is a non-isolated Buck-Boost converter, which means it can raise or lower voltage from the input power source and deliver it to the load. This makes it especially useful in applications where the voltage from the power source may not always be adequate. This converter can be used for powering many types of electronic systems such as automotive, industrial, medical and military systems.In addition to the voltage conversion functionality, the VI-BTN-IV-F3 also offers low-cost, high-efficiency operation. This makes it ideal for applications where a high-end power system is not required. This converter is designed to operate at continuous output currents from 0 to 4 A with an input voltage of 6-36 V DC.For operation, the VI-BTN-IV-F3 requires a Control IC and an external resistor or capacitor. The Control IC provides the necessary feedback to the converter to set the output voltage and current. The Control IC also provides protection features such as over-voltage protection and short-circuit protection to protect against any accidents or malfunctions.The external resistor or capacitor is connected to the Control IC and provides the necessary feedback to the converter. The external resistor or capacitor is used to adjust the output voltage of the converter based on the input voltage. After the output voltage is adjusted, the converter is then ready to be connected to the load.The VI-BTN-IV-F3 has been designed to provide a high level of efficiency. This is accomplished by using a synchronous rectification circuit, which helps improve the efficiency of the converter. In addition, the use of low-power components further increases the efficiency, giving it a high level of overall system performance.The VI-BTN-IV-F3 converter is also designed to provide an adjustable soft-start feature. This feature helps to reduce in-rush current in order to protect the device from any damage due to high voltages. The VI-BTN-IV-F3 converter also has a built-in reverse voltage protection, which helps to protect the device from any damage due to reverse voltages.In conclusion, the VI-BTN-IV-F3 converter is a great addition to any electronic system. The wide range of applications, high efficiency, adjustable soft-start, and built-in protection features make it a great choice for any kind of application that requires a non-isolated DC-DC converter.

The specific data is subject to PDF, and the above content is for reference