Allicdata Part #: | VI-BTN-IW-F4-ND |
Manufacturer Part#: |
VI-BTN-IW-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VI-BTN-IW-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 66V |
Voltage - Input (Max): | 160V |
Voltage - Output 1: | 18.5V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 2.7A |
Power (Watts): | 100W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -40°C ~ 85°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are widely used in many applications such as providing a stable and regulated voltage for portable electronic devices, and stabilizing the voltage and current supplied to systems. The VI-BTN-IW-F4 is a specific type of DC-DC converter in high frequency range with wide range of input voltage. Its application field and working principle will be discussed in this article.
Input Voltage and Frequency Requirements
The input voltage of VI-BTN-IW-F4 must be between 9V and 24V. This range is wide enough to fit in almost all portable electronic devices. The input voltage should not exceed 24V and should be higher than 9V. In addition, the input frequency must be between 50Hz to 400Hz. This range is low enough for most portable applications and high enough for different kinds of power supplies.
Application Field
The VI-BTN-IW-F4 converter can be used in various application fields due to its wide range of input voltage and frequency. It can be used in laptop computers, smart phones, tablet devices, digital cameras, etc. It is also widely used in industrial applications, such as medical equipment, automotive systems, industrial robots, and building automation systems.
Working Principle
VI-BTN-IW-F4 converter follows a classic buck-boost working principle. The incoming AC current is converted into a high frequency by an inductor or transformer. This high frequency AC is then converted into high voltage DC using high frequency switches. This high voltage DC then passes through a filter to reduce the ripple voltage and then to the main switch – a MOSFET. The switch turns on and off in a regulated manner to convert the DC voltage into the desired output. The output voltage is determined by setting the voltage reference.
Conclusion
The VI-BTN-IW-F4 converter is a highly efficient DC-DC converter in the high frequency range. Its wide range of input voltage and frequency makes it applicable to a wide range of applications. Its working principle is based on a classic buck-boost topology, where the incoming current is converted into high frequency AC, and then to DC using high frequency switches, and finally to the desired output voltage through a MOSFET switch.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...