VI-BTN-IW-S Allicdata Electronics
Allicdata Part #:

VI-BTN-IW-S-ND

Manufacturer Part#:

VI-BTN-IW-S

Price: $ 0.00
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 18.5V 100W
More Detail: Isolated Module DC DC Converter 1 Output 18.5V ...
DataSheet: VI-BTN-IW-S datasheetVI-BTN-IW-S Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Series: VI-200™
Packaging: Bulk 
Part Status: Active
Type: Isolated Module
Number of Outputs: 1
Voltage - Input (Min): 66V
Voltage - Input (Max): 160V
Voltage - Output 1: 18.5V
Voltage - Output 2: --
Voltage - Output 3: --
Current - Output (Max): 2.7A
Power (Watts): 100W
Voltage - Isolation: 3kV
Applications: ITE (Commercial)
Features: OCP, OTP, OVP, SCP
Operating Temperature: -40°C ~ 85°C
Efficiency: 90%
Mounting Type: Through Hole
Package / Case: Full Brick
Size / Dimension: 4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm)
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are electrical circuits that are used to convert one direct current (DC) supply into another. They are also known as voltage or current converters, and can be found in a wide variety of applications from industrial, commercial and military applications to consumer electronics, automotive and telecoms. One of the most common types of DC DC converters is the VI-BTN-IW-S type. This article will look at the application field and working principle of this type of converter.The VI-BTN-IW-S converter is a high efficiency, low cost, high power, low-frequency DC-DC converter. It is designed for cost effective applications such as industrial automation, test and measurement, and distributed power supplies. The VI-BTN-IW-S converter is available in a variety of sizes and mounting configurations, making it suitable for a wide range of applications.The VI-BTN-IW-S can be used in a variety of DC-DC application fields such as buck, boost, floating, and isolated DC-DC converters. It is a bidirectional, two-terminal, switched-inductor, full-bridge converter with an input voltage range of 5 to 60V. It can support both input and output currents of up to 25A. The VI-BTN-IW-S can be used as a buck, boost, bridge, or floating converter depending on the load requirements.The working principle of the VI-BTN-IW-S is relatively straightforward. It is based on a full-bridge converter topology, whereby four transistors are placed in the circuit and connected in series. The alternating direction of the transistors alternates the direction of the current flow. This creates an ideal rectifier, converting the AC input voltage to the desired DC voltage. The IVb-TN-IW-S has four switch positions that can be adjusted to the required DC voltage through a single-ended control loop. The converter has the ability to automatically detect the output voltage, allowing for efficient and accurate regulation.The VI-BTN-IW-S is a highly efficient and reliable DC-DC converter that is suitable for a wide variety of applications. Its low cost, high power, and full-bridge topology make it an ideal choice for a variety of power conversion scenarios. The converter is also compact, lightweight, and easy to use.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics