Allicdata Part #: | VI-BTN-MW-F2-ND |
Manufacturer Part#: |
VI-BTN-MW-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 18.5V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
DataSheet: | VI-BTN-MW-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | VI-200™ |
Packaging: | Bulk |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 66V |
Voltage - Input (Max): | 160V |
Voltage - Output 1: | 18.5V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 2.7A |
Power (Watts): | 100W |
Voltage - Isolation: | 3kV |
Applications: | ITE (Commercial) |
Features: | OCP, OTP, OVP, SCP |
Operating Temperature: | -55°C ~ 85°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | Full Brick |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
VI-BTN-MW-F2 (Voltage-Insulated Bridge Topology Non-Isolated-Module and Water-Cooled Flat-Package) is a type DC-DC converter. It is built around inherently isolated and frequency-modulated buck/boost switching topologies, which offer superior power density and efficiency. This DC-DC converter has been certified by UL/cUL, VDE, TUV, ENERGY STAR and others.
Application Field
Since VI-BTN-MW-F2 has very high power density, it is suitable for applications which require a high level of power efficiency and compact size. It is widely used in various industries such as automotive, consumer electronics, communication, industrial equipment and medical equipment. It can be used for both primary (AC mains) and secondary (DC/DC switching) power supplies.
Working Principle
The working principle of VI-BTN-MW-F2 is built around frequency modulation and inherently isolated buck/boost switching topologies. It is designed to provide high efficiency in a compact size while maintaining the required isolation. The operating frequency is modulated according to the input voltage and load current, and this ensures that the converter runs at the most efficient frequency, as well as offering high power efficiency and low standby power consumption.
It has two stages for converting from low input voltage to high output voltage – a regulated voltage buck boost stage and an unregulated voltage gain stage. The regulated voltage buck boost stage absorbs the input voltage variations and converts the input voltage to a lower, regulated voltage. The unregulated voltage gain stage increases the voltage from the regulated buck/boost stage and provides an output voltage which is typically three to four times the input voltage.
VI-BTN-MW-F2 provides excellent power density, efficiency, reliability and protection against EMI emissions. It is best suited for high power applications with tight space constraints.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...