VI-BTN-MW-F4

Series:	VI-200™
Packaging:	Bulk
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	66V
Voltage - Input (Max):	160V
Voltage - Output 1:	18.5V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	2.7A
Power (Watts):	100W
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Features:	OCP, OTP, OVP, SCP
Operating Temperature:	-55°C ~ 85°C
Efficiency:	90%
Mounting Type:	Through Hole
Package / Case:	Full Brick
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DC-DC converters form one type of power conversion devices. They are generally used in applications that have different voltage requirements. A DC-DC converter takes the DC voltage from a DC power source and converts it to a different DC voltage level. This enables the device to function properly with an optimal voltage level. The VI-BTN-MW-F4 is one such DC-DC converter that is made by Vicor Corporation. In this article, we will look at the application fields and working principle of the VI-BTN-MW-F4.

VI-BTN-MW-F4 Application Fields

The VI-BTN-MW-F4 DC-DC converter is a high-voltage, high-frequency device that is suitable for applications that require an input voltage of up to 5000V DC. It has a high efficiency of up to 85% and can output up to 300W. It is typically used in a variety of industries such as the aerospace, automotive, medical, and telecoms industries. Applications in which the VI-BTN-MW-F4 is commonly used include unmanned aerial vehicles (UAVs), medical imaging, power supplies for satellite communication systems, and base station power supplies.

VI-BTN-MW-F4 Working Principle

The VI-BTN-MW-F4 is based on the principle of switched-mode power supplies (SMPS). This means that the device operates by rapidly switching transistors on and off, thus allowing for the efficient conversion of power from a DC source to a DC load.The VI-BTN-MW-F4 features a buck-boost topology, which means that it can both step down (buck) and step up (boost) the input voltage accordingly. This makes it a versatile device, as it is able to supply a wide range of output voltages from the same input voltage.As for the physical components, the VI-BTN-MW-F4 has an IC controller, which controls the operation of the converter by generating a pulse width modulation (PWM) signal. This signal is then used to control the switching transistors, thereby producing the desired output voltage. Other components include a transformer, capacitors, and inductors.The VI-BTN-MW-F4 is designed to adapt its DC-DC conversion ratio and voltage regulation based on the load requirements. It also features a wide range of input and output voltage protection and controlling features, such as short-circuit protection, over-voltage protection, and over-current protection, to name a few.

Conclusion

The VI-BTN-MW-F4 from Vicor Corporation is a high-voltage, high-frequency DC-DC converter that is suitable for a wide range of applications. It features a buck-boost topology and can step down and step up the input voltage accordingly. It also features a wide range of protection and control features, such as over-voltage protection, over-current protection, and short-circuit protection. The physical components used in the device include an IC controller, transformer, capacitors, and inductors.

The specific data is subject to PDF, and the above content is for reference