VI-BTW-IV Allicdata Electronics
Allicdata Part #:

VI-BTW-IV-ND

Manufacturer Part#:

VI-BTW-IV

Price: $ 0.00
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 5.5V 150W
More Detail: Isolated Module DC DC Converter 1 Output 5.5V 9...
DataSheet: VI-BTW-IV datasheetVI-BTW-IV Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Current - Output (Max): 9.09A
Size / Dimension: 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm)
Package / Case: Full Brick
Mounting Type: Through Hole
Efficiency: 90%
Operating Temperature: -40°C ~ 85°C
Features: OCP, OTP, OVP, SCP
Applications: ITE (Commercial)
Voltage - Isolation: 3kV
Power (Watts): 150W
Series: VI-200™
Voltage - Output 3: --
Voltage - Output 2: --
Voltage - Output 1: 5.5V
Voltage - Input (Max): 160V
Voltage - Input (Min): 66V
Number of Outputs: 1
Type: Isolated Module
Part Status: Active
Packaging: Bulk 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VI-BTW-IV is a type of DC-DC converter. It is a switching converter, which is widely used in modern power electronics system due to its high efficiency, low cost and low size. The VI-BTW-IV converter is a buck/boost type of DC-DC converter that can be used to convert a low voltage DC input to a higher voltage or a lower voltage DC output.

The operating principle of VI-BTW-IV is relatively simple. When the DC input is applied to the converter, the voltage is converted to a high frequency AC signal by an inverter. The converted AC signal is then applied to a transformer, which steps the voltage up or down depending on the desired output. This output is then rectified and smoothed by a diode and capacitor before it is applied to the load.

The VI-BTW-IV converter is mainly used in consumer as well as in industrial applications. In consumer applications, the VI-BTW-IV converter is used to convert low battery voltages, such as 3V or 5V, into 12V or 24V for charging applications or powering a small device such as a cell phone. It is also used in automotive applications to convert the vehicle\'s 12V battery power into a variable 5V, which can be used to power onboard electronics.

In industrial applications, the VI-BTW-IV converter is used to adjust voltage levels in order to reduce power losses and improve efficiency. It is also used in motor control and power conversion systems, to convert any DC input voltage into a stable output voltage for the motor. In renewable energy systems, the VI-BTW-IV converter is used to convert the Solar photovoltaic module DC output into usable AC power.

The VI-BTW-IV is highly efficient and reliable due to its simplicity and low number of components. In addition, the converter is capable of providing a wide range of output voltages due to its wide input voltage range. It can also be easily tuned to provide the desired output voltage. Furthermore, due to its low cost and size, it is suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics