| Allicdata Part #: | VI-BVP-EX-ND |
| Manufacturer Part#: |
VI-BVP-EX |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 13.8V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
| DataSheet: |  VI-BVP-EX Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 5.43A |
| Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 13.8V |
| Voltage - Input (Max): | 36V |
| Voltage - Input (Min): | 9V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC Converters are a type of power electronics devices that can convert a DC input to a desired DC output. This type of power converter can provide important advantages over the traditional linear regulated power supplies such as efficiency, power density, capacity, and power rating. One of the most important application fields of DC-DC converters is the VI-BVP-EX application field. The VI-BVP-EX application field requires highly dynamic, high-precision, and fast response. These requirements can be satisfied using a power electronics device like a DC-DC converter.
The working principle of the VI-BVP-EX power converter is based on the switching mode converter, which is a topology that consists of a power switch (transistor or thyristor), an inductor, and a diode. The switch is periodically turned on and off to create a voltage pulse on the output. The output voltage is then determined by the ratio of the pulse width to the period. This type of converter can provide a high degree of regulation and low output impedance.
The VI-BVP-EX is an advanced power converter technology that can achieve high efficiency, ultrafast dynamic response, and good ripple rejection. It is based on the same principle as the buck-boost converter but with the addition of an additional DC inductor. The inductor is used to create an isolated DC converter that can provide higher voltage than the input. This allows for a high degree of control and regulation of the output voltage.
The VI-BVP-EX is a very interesting and promising technology for power converters that require high speed, high precision and dynamic responses. It can offer superior efficiency, power density and power rating compared to traditional linear regulated supplies. It is also a technology that has a lot of potential for future applications, particularly in the fields of automotive and embedded systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...