VI-BWV-IW

Series:	VI-200™
Packaging:	Bulk
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	18V
Voltage - Input (Max):	36V
Voltage - Output 1:	5.8V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	17.24A
Power (Watts):	100W
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Features:	OCP, OTP, OVP, SCP
Operating Temperature:	-40°C ~ 85°C
Efficiency:	90%
Mounting Type:	Through Hole
Package / Case:	Full Brick
Size / Dimension:	4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Introduction

DC DC converters are used in a wide range of applications, from consumer electronics to industrial automation and motor control. In this article, we will look at the VI-BWV-IW application field and working principle. The VI-BWV-IW converter is a type of DC DC converter typically used in applications requiring the conversion of rectified AC voltage to DC voltage. It is a family of converters belonging to the “switch mode” DC DC converter family.

VI-BWV-IW Application Field

VI-BWV-IW converters are typically used to convert rectified AC voltage to DC voltage for applications requiring the input of DC voltage such as for driving DC motors, UPS systems, and other motion control uses. This type of DC DC converter is most commonly used in industrial applications, such as servo-systems, inverters, and motion control systems, as it is an efficient and cost-effective solution for the conversion of rectified AC voltage to DC voltage. It is also suitable for supplying power to consumer electronic devices, such as digital cameras, mobile phones, and other consumer equipment using direct current.

VI-BWV-IW Working Principle

The VI-BWV-IW converter is a switch mode converter and uses a switch, or transistor, to control the output voltage. The output voltage is provided by a rectified AC voltage source, with the switch controlling the output voltage by “chopping” the rectified AC voltage. This “chopping” of the rectified AC voltage is achieved by the switch turning on and off on a predetermined period rate, resulting in a pulsed wave that is in turn rectified into a DC voltage. The output voltage of the VI-BWV-IW converter is determined by the voltage source, the switch, and the “chopping” frequency of the switch. The VI-BWV-IW converter has several advantages over traditional linear DC DC converters, such as its extremely high efficiency, low noise, and small size. Its high efficiency is due to its high voltage switching frequency, which reduces the power dissipated as heat. This makes it a cost-effective and energy-efficient solution for many applications. Additionally, the low noise level of VI-BWV-IW converters makes them suitable for noise-sensitive applications.

Conclusion

VI-BWV-IW converters are a type of switch mode DC DC converter, typically used in applications requiring the conversion of rectified AC voltage to DC voltage. It is a reliable and cost-effective solution for many industrial, consumer electronic, and motion control applications. The VI-BWV-IW converter has several benefits, including high efficiency, low noise, and small size. These features make the VI-BWV-IW converter a popular choice in many applications.

The specific data is subject to PDF, and the above content is for reference