| Allicdata Part #: | VI-BWW-CW-B1-ND |
| Manufacturer Part#: |
VI-BWW-CW-B1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 5.5V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 5.5V 1... |
| DataSheet: |  VI-BWW-CW-B1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 18.18A |
| Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VI-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 5.5V |
| Voltage - Input (Max): | 36V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used to convert electricity from one form of energy to another. In particular, they are used to convert direct current (DC) to alternating current (AC) or vice versa. The most common type of converter is the VI-BWW-CW-B1. This converter is used to convert voltage from DC to AC.
The VI-BWW-CW-B1 is a transformerless converter that is commonly used in industrial or commercial applications. It consists of an input stage, a multi-stage power electronics section, and an output stage. The input stage consists of a diode bridge and a four-quadrant switch. The diode bridge rectifies the incoming AC voltage and converts it to DC. The four-quadrant switch is used to control the direction of the voltage, allowing the converter to switch between AC to DC and vice versa.
The multi-stage power electronics section consists of a reverse blocking IGBT, a flyback diode, and a transformer. The reverse blocking IGBT is used to regulate the power flow. The flyback diode provides protection against current and voltage spikes. The transformer is used to step up or step down the voltage, depending on the desired output.
The output stage consists of an output diode, a variable frequency SCR, and a filter capacitor. The output diode ensures that the current flows in one direction only. The variable frequency SCR is used to control the frequency of the output signal. The filter capacitor provides additional protection against voltage and current spikes.
The VI-BWW-CW-B1 converter is capable of converting up to 600V AC to DC, and up to 2kV DC to AC. It has a wide operating temperature range of -40°C to +85°C and can operate at frequencies up to 20kHz. It is also highly efficient, with a conversion efficiency of up to 98%.
The VI-BWW-CW-B1 converter is ideal for industrial and commercial applications where high voltage conversion is required. It can be used to control the speed of motors, to regulate the voltage in power grids, and to power electronic controls. Its wide operating temperature range makes it suitable for applications in extreme environments. In addition, its high efficiency makes it an energy-saving option.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...