VI-J02-EZ-F1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic circuits used to convert a direct current (DC) electrical input power to another DC voltage or current. A common example is a DC-DC power supply that converts a battery-level input voltage up or down to a regulated output voltage. DC-DC converters are used in a variety of applications such as mobile phones, netbooks, tablets, automotive electronics, laptops, industrial and military electronics, and in renewable energy systems. The VI-J02-EZ-F1 is one such DC-DC converter.

The VI-J02-EZ-F1 is a boost converter with a low cost, small size, and excellent performance. It is a high efficiency DC-DC converter with a wide input voltage range and adjustable output voltage. It features an active current-limited protection function, which ensures that all connected components are reliably protected from voltage and current surges. The VI-J02-EZ-F1 is ideal for use in power management applications such as battery-powered portable electronic devices, automotive applications, and more.

The VI-J02-EZ-F1 converts a constant input voltage into a constant and adjustable output voltage. The input voltage range is 4.5V-30V, while the output voltage range is fixed by the control voltage signal connected to the “S” pin. The output voltage can be set to any voltage within the range of 2V-5V (150mV or more). The output voltage is proportional to the input voltage, so as the input voltage decreases, the output voltage will also decrease.

The VI-J02-EZ-F1 is a switching converter. This means that the unit uses a control circuit to regulate the output voltage. It works by switching a load circuit at high frequency, allowing it to convert the power from one DC voltage level to another. The switching is done using insulated gate bipolar transistors (IGBTs) that are controlled by a PWM signal generated by the control circuit. When the IGBT is turned on, the input voltage, VIN, is stored in the inductor. When it is turned off, the stored energy is delivered to the output.

The VI-J02-EZ-F1 features a wide range of protection circuits to protect against overvoltage, undervoltage, temperature, overload, and short circuit conditions. These protective features ensure the safe operation of the converter even in harsh environmental conditions. The unit also features soft start circuitry, which gently ramps up the output voltage when the device is first powered on, and PFM control, which reduces switching losses and improves efficiency at light loads.

In summary, the VI-J02-EZ-F1 is a high efficiency, small size and low cost DC-DC boost converter with a wide input voltage range and adjustable output voltage. It is an ideal solution for power management applications in battery-powered portable devices, automotive applications, and more. It features an active current-limited protection function, soft start circuitry, PFM control, and a range of protective circuits to keep your device safe and reliable even in harsh environments.

The specific data is subject to PDF, and the above content is for reference